Yamamoto Seiichi, Komori Masataka, Akagi Takashi, Yamashita Tomohiro, Koyama Shuji, Morishita Yuki, Sekihara Eri, Toshito Toshiyuki
Radiological and Medical Laboratory Sciences, Nagoya University Graduate School of Medicine, Higashi-ku, Nagoya, Aichi 461-8673, Japan.
Hygo Ion Beam Medical Center, Hyogo 679-5165, Japan.
Med Phys. 2016 May;43(5):2455. doi: 10.1118/1.4946821.
The authors previously reported successful luminescence imaging of water during proton irradiation and its application to range estimation. However, since the feasibility of this approach for carbon-ion irradiation remained unclear, the authors conducted luminescence imaging during carbon-ion irradiation and estimated the ranges.
The authors placed a pure-water phantom on the patient couch of a carbon-ion therapy system and measured the luminescence images with a high-sensitivity, cooled charge-coupled device camera during carbon-ion irradiation. The authors also carried out imaging of three types of phantoms (tap-water, an acrylic block, and a plastic scintillator) and compared their intensities and distributions with those of a phantom containing pure-water.
The luminescence images of pure-water phantoms during carbon-ion irradiation showed clear Bragg peaks, and the measured carbon-ion ranges from the images were almost the same as those obtained by simulation. The image of the tap-water phantom showed almost the same distribution as that of the pure-water phantom. The acrylic block phantom's luminescence image produced seven times higher luminescence and had a 13% shorter range than that of the water phantoms; the range with the acrylic phantom generally matched the calculated value. The plastic scintillator showed ∼15 000 times higher light than that of water.
Luminescence imaging during carbon-ion irradiation of water is not only possible but also a promising method for range estimation in carbon-ion therapy.
作者此前报道了质子辐照过程中对水的成功发光成像及其在射程估计中的应用。然而,由于这种方法对碳离子辐照的可行性仍不明确,作者进行了碳离子辐照过程中的发光成像并估计射程。
作者将一个纯水模体放置在碳离子治疗系统的患者治疗床上,并在碳离子辐照期间用高灵敏度的冷却电荷耦合器件相机测量发光图像。作者还对三种类型的模体(自来水、丙烯酸块和塑料闪烁体)进行了成像,并将它们的强度和分布与含有纯水的模体进行了比较。
碳离子辐照期间纯水模体的发光图像显示出清晰的布拉格峰,从图像中测得的碳离子射程与模拟得到的射程几乎相同。自来水模体的图像显示出与纯水模体几乎相同的分布。丙烯酸块模体的发光图像产生的发光强度比水模体高7倍,射程短13%;丙烯酸模体的射程通常与计算值相符。塑料闪烁体的发光比水高约15000倍。
碳离子辐照水期间的发光成像不仅可行,而且是碳离子治疗中射程估计的一种有前景的方法。