Yan Mengguo, Huang Yuerui, Lu Mingjia, Lin Fang-Yi, Hernández Nacú B, Cochran Eric W
Chemical and Biological Engineering, Iowa State University , Ames, Iowa, United States.
Biomacromolecules. 2016 Aug 8;17(8):2701-9. doi: 10.1021/acs.biomac.6b00745. Epub 2016 Jul 13.
Here we report the reversible addition-fragmentation chain transfer (RAFT) polymerization of acrylated epoxidized soybean oil (AESO), a cross-linker molecule, to high conversion (>50%) and molecular weight (>100 kDa) without macrogelation. Surprisingly, gelation is suppressed in this system far beyond the expectations predicated both on Flory-Stockmeyer theory and multiple other studies of RAFT polymerization featuring cross-linking moieties. By varying AESO and initiator concentrations, we show how intra- versus intermolecular cross-linking compete, yielding a trade-off between the degree of intramolecular linkages and conversion at gel point. We measured polymer chain characteristics, including molecular weight, chain dimensions, polydispersity, and intrinsic viscosity, using multidetector gel permeation chromatography and NMR to track polymerization kinetics. We show that not only the time and conversion at macrogelation, but also the chain architecture, is largely affected by these reaction conditions. At maximal AESO concentration, the gel point approaches that predicted by the Flory-Stockmeyer theory, and increases in an exponential fashion as the AESO concentration decreases. In the most dilute solutions, macrogelation cannot be detected throughout the entire reaction. Instead, cyclization/intramolecular cross-linking reactions dominate, leading to microgelation. This work is important, especially in that it demonstrates that thermoplastic rubbers could be produced based on multifunctional renewable feedstocks.
在此,我们报道了丙烯酸酯化环氧大豆油(AESO,一种交联剂分子)通过可逆加成-断裂链转移(RAFT)聚合法实现了高转化率(>50%)和高分子量(>100 kDa)的聚合,且未发生宏观凝胶化。令人惊讶的是,该体系中凝胶化的抑制程度远远超出了基于弗洛里-斯托克迈耶理论以及其他多项具有交联部分的RAFT聚合研究的预期。通过改变AESO和引发剂的浓度,我们展示了分子内交联与分子间交联是如何相互竞争的,在凝胶点处分子内键合程度与转化率之间产生了权衡。我们使用多检测器凝胶渗透色谱法和核磁共振来跟踪聚合动力学,测量了聚合物链的特性,包括分子量、链尺寸、多分散性和特性粘度。我们表明,不仅宏观凝胶化的时间和转化率,而且链结构也在很大程度上受到这些反应条件的影响。在AESO浓度最大时,凝胶点接近弗洛里-斯托克迈耶理论预测的值,并随着AESO浓度的降低呈指数增加。在最稀的溶液中,在整个反应过程中都检测不到宏观凝胶化。相反,环化/分子内交联反应占主导,导致微观凝胶化。这项工作很重要,特别是因为它表明可以基于多功能可再生原料生产热塑性橡胶。