Atkinson James D, Murray Benjamin J, O'Sullivan Daniel
Institute of Atmospheric and Climate Science, ETH Zurich , Universitätstrasse 16, 8092 Zurich, Switzerland.
Institute for Climate and Atmospheric Science, School of Earth and Environment, University of Leeds , Woodhouse Lane, Leeds LS2 9JT, United Kingdom.
J Phys Chem A. 2016 Aug 25;120(33):6513-20. doi: 10.1021/acs.jpca.6b03843. Epub 2016 Aug 15.
The homogeneous freezing of water is of fundamental importance to a number of fields, including that of cloud formation. However, there is considerable scatter in homogeneous nucleation rate coefficients reported in the literature. Using a cold stage droplet system designed to minimize uncertainties in temperature measurements, we examined the freezing of over 1500 pure water droplets with diameters between 4 and 24 μm. Under the assumption that nucleation occurs within the bulk of the droplet, nucleation rate coefficients fall within the spread of literature data and are in good agreement with a subset of more recent measurements. To quantify the relative importance of surface and volume nucleation in our experiments, where droplets are supported by a hydrophobic surface and surrounded by oil, comparison of droplets with different surface area to volume ratios was performed. From our experiments it is shown that in droplets larger than 6 μm diameter (between 234.6 and 236.5 K), nucleation in the interior is more important than nucleation at the surface. At smaller sizes we cannot rule out a significant contribution of surface nucleation, and in order to further constrain surface nucleation, experiments with smaller droplets are necessary. Nevertheless, in our experiments, it is dominantly volume nucleation controlling the observed nucleation rate.
水的均匀冻结对包括云形成在内的许多领域至关重要。然而,文献中报道的均匀成核速率系数存在相当大的离散性。我们使用一个旨在将温度测量不确定性降至最低的冷台液滴系统,研究了1500多个直径在4至24μm之间的纯水液滴的冻结情况。在成核发生在液滴主体内的假设下,成核速率系数落在文献数据的范围内,并且与最近的一部分测量结果高度一致。为了量化我们实验中表面成核和体积成核的相对重要性,在液滴由疏水表面支撑并被油包围的情况下,对具有不同表面积与体积比的液滴进行了比较。从我们的实验可以看出,对于直径大于6μm的液滴(在234.6至236.5K之间),内部成核比表面成核更重要。在较小尺寸下,我们不能排除表面成核的显著贡献,为了进一步限制表面成核,需要进行更小液滴的实验。然而,在我们的实验中,主要是体积成核控制着观察到的成核速率。