Suppr超能文献

[骨盆损伤的微创固定:骨盆骨尺寸的CT研究]

[Minimal Invasive Fixation of Pelvic Injury: CT-Study of the Pelvic Bone Dimensions].

作者信息

Džupa V, Němec J, Pavlíčko Z, Laboš M, Šrám J, Taller S, Báča V

出版信息

Acta Chir Orthop Traumatol Cech. 2016;83(3):147-54.

Abstract

UNLABELLED

PURPOSE OF THE STUDY This radiographic study was focused on measuring the dimensions of pelvic bones at sites of minimally invasive screw insertion with the aim to assess the risk of damage to vascular and nervous structures. MATERIAL AND METHODS The group consisted of 77 patients (39 women and 38 men) aged between 19 and 85 years (average, 65; women, 65; men, 64) who underwent CT examination of the pelvis because of reasons other than injury. On the left side, a total of 14 dimensions of the superior pubic ramus, supraacetabular region, retroacetabular region, quadrilateral surface of the acetabulum and lateral foraminal sides of the S1 and S2 vertebral bodies were measured. The results were evaluated using descriptive statistics. RESULTS The inner antero-posterior dimension of the isthmic area of the superior pubic ramus was 8 mm or less in four women (10.3%) and 9 or 10 mm in further 14 women (35.9%). The inner cranio-caudal dimension of the superior pubic ramus was 8 mm or less in 14 women (35.9%) and 9 or 10 mm in further 16 women (41.0%). These dimensions obtained in men were as follows: 8 mm and less in three men (7.9%) (7 mm in one, 8 mm in two), and 9 or 10 mm in nine men. Sizes of the other pelvic bones were large enough to allow for safe insertion of single screws. DISCUSSION Single screws most frequently used in minimally invasive treatment of pelvic fractures are cannulated screws 7.3 mm or 6.5 mm in diameter; less frequently used are 4.5-mm cancellous screws (e.g. in treatment of avulsion injuries) or long 3.5-mm cortical "creeping" screws to be inserted in the superior pubic ramus. The use of "creeping" screws reported by several authors indicates problems associated with placement of standard screws (diameter, 7.3 mm and 6.5 mm) through the isthmus into the superior ramus. In slim high pelvises of some patients with gracile skeletons or in low pelvises of small women, the screws can protrude over the cortical margin. However, the risk of injury to nervous or vascular structures is low when the intraosseous screw is exactly inserted and it is so even in case its thread cuts into cortical bone. Neither the femoral artery nor the femoral nerve is situated too close to the superior pubic ramus. The "corona mortis" may potentially be jeopardised because of its contact with both the superior and posterior cortical bones of the superior ramus, but it usually follows a course more lateral to the isthmus of the ramus. CONCLUSIONS The results of the study showed that the size of the superior pubic ramus in its isthmic area may cause difficulties during insertion of cannulated screws with standard diameters (7.3 mm and 6.5 mm) in the majority of women and in some men. The risk of damage to vascular and nervous structures during screw insertion is associated only with the superior and posterior walls of the superior pubic ramus and with the area of the S2 foramen in case the correct procedure of intraosseous screw insertion is not strictly followed.

KEY WORDS

retrograde pubic screw, iliosacral screw, supraacetabular screw, retrograde posterior column screw.

摘要

未标注

研究目的 本影像学研究聚焦于测量微创螺钉置入部位的骨盆骨尺寸,旨在评估损伤血管和神经结构的风险。材料与方法 该组由77例患者(39例女性和38例男性)组成,年龄在19至85岁之间(平均65岁;女性65岁;男性64岁),他们因非损伤原因接受了骨盆CT检查。在左侧,总共测量了耻骨上支、髋臼上区域、髋臼后区域、髋臼四边形表面以及S1和S2椎体侧孔边的14个尺寸。结果采用描述性统计进行评估。结果 耻骨上支峡部区域的内前后径在4例女性(10.3%)中为8mm或更小,在另外14例女性(35.9%)中为9或10mm。耻骨上支的内颅尾径在14例女性(35.9%)中为8mm或更小,在另外16例女性(41.0%)中为9或10mm。男性的这些尺寸如下:3例男性(7.9%)(1例为7mm,2例为8mm)为8mm及以下,9例男性为9或10mm。其他骨盆骨的尺寸足够大,可安全置入单枚螺钉。讨论 骨盆骨折微创治疗中最常用的单枚螺钉是直径7.3mm或6.5mm的空心螺钉;较少使用的是4.5mm的松质骨螺钉(如用于治疗撕脱伤)或用于耻骨上支置入的长3.5mm皮质“爬行”螺钉。几位作者报道的“爬行”螺钉的使用表明,将标准直径(7.3mm和6.5mm)的螺钉通过峡部置入耻骨上支存在问题。在一些骨骼纤细的患者的窄高骨盆或小体型女性的低骨盆中,螺钉可能会突出于皮质边缘。然而,当骨内螺钉准确置入时,损伤神经或血管结构的风险较低,即使其螺纹切入皮质骨时也是如此。股动脉和股神经均未紧邻耻骨上支。“死亡冠”可能因其与耻骨上支的上皮质骨和后皮质骨均接触而受到潜在威胁,但它通常走行于耻骨上支峡部的更外侧。结论 研究结果表明,耻骨上支峡部区域的尺寸可能会在大多数女性和一些男性中导致标准直径(7.3mm和6.5mm)的空心螺钉置入困难。在未严格遵循骨内螺钉正确置入程序的情况下,螺钉置入过程中损伤血管和神经结构的风险仅与耻骨上支的上壁和后壁以及S2孔区域有关。

关键词

逆行耻骨螺钉、髂骶螺钉、髋臼上螺钉、逆行后柱螺钉

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验