Davis Craig Warren, Di Toro Dominic M
Department of Civil & Environmental Engineering, University of Delaware, Newark, DE 19716, USA.
Department of Civil & Environmental Engineering, University of Delaware, Newark, DE 19716, USA.
Chemosphere. 2016 Dec;164:634-642. doi: 10.1016/j.chemosphere.2016.08.135. Epub 2016 Sep 13.
Methods for obtaining accurate predictions of solvent-water partitioning for neutral organic chemicals (e.g., K) are well-established. However, methods that provide comparable accuracy are not available for predicting the solvent-water partitioning of ionic species. Previous methods for addressing charge contributions to solvent-water partitioning rely on charged solute descriptors which are obtained from regressions to neutral species descriptors as well as charged descriptors which are specific to unique charge-functionalities and structural moieties. This paper presents a method for obtaining Abraham poly-parameter linear free energy relationship (pp-LFER) descriptors using quantum chemical calculations and molecular structure, only. The method utilizes a large number of solvent-water systems to overcome large errors in individual quantum chemical computations of ionic solvent-water partition coefficients. The result is a single set of quantum-chemically estimated Abraham solute parameters (QCAP) which are solvent-independent, and can be used to predict the solvent-water partitioning of ionic species. Predictions of solvent-water partition coefficients for ionic species using quantum-chemically estimated Abraham parameters (QCAPs) are shown to provide improved accuracy compared over both existing Absolv-estimated Abraham solute parameters (AAP) as well as direct a priori quantum chemical (QC) calculations for partitioning of anionic solutes in 4 organic solvent-water systems (RMS = 0.740, 2.48 and 0.426 for the Absolv, QC and QCAP methods, respectively). For quaternary amine cations in the octanol-water system the RMS errors of the solvent-water partition coefficients were larger and similar between the two Abraham models (RMSE = 0.997 and 1.16, for the AAP and QCAP methods, respectively). Both methods showed significant improvement over direct QC calculations (RMSE = 2.82).
获得中性有机化学品溶剂-水分配系数(如K)准确预测值的方法已经很成熟。然而,对于预测离子型物种的溶剂-水分配,尚无具有可比准确性的方法。以往解决电荷对溶剂-水分配贡献的方法依赖于带电溶质描述符,这些描述符是通过对中性物种描述符的回归以及特定于独特电荷功能和结构部分的带电描述符获得的。本文提出了一种仅使用量子化学计算和分子结构来获得亚伯拉罕多参数线性自由能关系(pp-LFER)描述符的方法。该方法利用大量溶剂-水体系来克服离子型溶剂-水分配系数个别量子化学计算中的较大误差。结果得到了一组与溶剂无关的量子化学估计的亚伯拉罕溶质参数(QCAP),可用于预测离子型物种的溶剂-水分配。与现有的Absolv估计的亚伯拉罕溶质参数(AAP)以及直接的先验量子化学(QC)计算相比,使用量子化学估计的亚伯拉罕参数(QCAP)对离子型物种的溶剂-水分配系数进行预测的准确性更高,在4种有机溶剂-水体系中,阴离子溶质分配的Absolv、QC和QCAP方法的均方根误差(RMS)分别为0.740、2.48和0.426。对于辛醇-水体系中的季铵阳离子,两种亚伯拉罕模型的溶剂-水分配系数的均方根误差较大且相似(AAP和QCAP方法的RMSE分别为0.997和1.16)。两种方法均比直接的QC计算有显著改进(RMSE = 2.82)。