Rodriguez-Mendez Luis Manuel, Martinez-Ruiz Jose de Jesus, Perez-Manzo Ruben, Corona-Hernandez Jorge Luis, Alcala-Zermeno Juan Luis, Sanchez-Enriquez Sergio
Department of Orthopedic Surgery, Antiguo Hospital Civil Fray Antonio Alcalde, Guadalajara, Jalisco, Mexico.
Department of Arthroscopy and Sports Medicine, Antiguo Hospital Civil Fray Antonio Alcalde, Guadalajara, Jalisco, Mexico.
J Knee Surg. 2017 Jul;30(6):544-548. doi: 10.1055/s-0036-1593622. Epub 2016 Oct 25.
The incidence of anterior cruciate ligament (ACL) injuries is rising every year. The autologous hamstring tendon graft, using semitendinosus tendon (SMT) and gracilis tendon (GR), is a common repair technique in the management of ACL injuries due to its multiple advantages. Using a final graft with a minimum diameter of 8 mm is necessary to avoid graft failure. The aim of this study was to find a correlation between preoperative ultrasound (USG) measurement of the SMT and GR tendon diameters (SMTd and GRd) and their actual diameters measured during the grafting procedure. In the present study, 33 male patients aged between 16 and 43 years with ACL injury that required grafting were enrolled. Before the grafting procedure, we sonographically measured the SMTd, GRd, and calculated the hamstring tendon diameter (SMTd + GRd) as the sum of these two. During surgery, we obtained the SMTd, GRd, and SMTd + GRd; we also obtained the length of both tendons and the final graft diameter (FGd). We then compared the obtained values. Mean age was 25.6 ± 7.9 years in our study population. The mean SMTd, GRd, and SMTd + GRd obtained by USG versus transoperatively were 4.9 versus 4.7 mm, 4.3 versus 3.8 mm, and 9.3 versus 8.6 mm, respectively. The mean of FGd was 8.4 mm and the mean length of both tendons was 14.2 cm. The GRd obtained by USG positively correlated with SMTd, SMT tendon length, GRd, and SMTd + GRd ( = 0.460, 0.404, 0.411, and 0.508, respectively). USG-obtained GRd predicts a final tendon diameter < 8 mm (high risk of failure) with a sensitivity, specificity, positive predictive value, and negative predictive value of 100, 54, 28 and 100%, respectively, using 4.5 mm as cutoff. Of all obtained grafts, 85% were deemed adequate (≥ 8 mm) using transoperative measurement, while 91% were ≥ 8 mm using USG measurement. The USG measurement of hamstring tendons is a useful method to predict their transoperative diameter. GRd obtained by USG is the best predictor of transoperative GRd and SMTd + GRd.
前交叉韧带(ACL)损伤的发生率逐年上升。使用半腱肌肌腱(SMT)和股薄肌肌腱(GR)的自体腘绳肌腱移植,因其具有多种优点,是ACL损伤治疗中一种常见的修复技术。使用最小直径为8毫米的最终移植物以避免移植物失败是必要的。本研究的目的是找出术前超声(USG)测量的SMT和GR肌腱直径(SMTd和GRd)与移植手术中测量的实际直径之间的相关性。在本研究中,纳入了33例年龄在16至43岁之间、因ACL损伤需要移植的男性患者。在移植手术前,我们通过超声测量了SMTd、GRd,并将腘绳肌腱直径(SMTd + GRd)计算为这两者之和。在手术过程中,我们获取了SMTd、GRd和SMTd + GRd;我们还获取了两根肌腱的长度和最终移植物直径(FGd)。然后我们比较了所获得的值。我们研究人群的平均年龄为25.6±7.9岁。通过USG与手术中获得的平均SMTd、GRd和SMTd + GRd分别为4.9对4.7毫米、4.3对3.8毫米和9.3对8.6毫米。FGd的平均值为8.4毫米,两根肌腱的平均长度为14.2厘米。通过USG获得的GRd与SMTd、SMT肌腱长度、GRd和SMTd + GRd呈正相关(分别为=0.460、0.404、0.411和0.508)。以4.5毫米为临界值,通过USG获得的GRd预测最终肌腱直径<8毫米(失败风险高)的敏感度、特异度、阳性预测值和阴性预测值分别为100%、54%、28%和100%。在所有获得的移植物中,使用手术中测量,85%被认为足够(≥8毫米),而使用USG测量,91%≥8毫米。USG测量腘绳肌腱是预测其手术中直径的一种有用方法。通过USG获得的GRd是手术中GRd和SMTd + GRd的最佳预测指标。