Suppr超能文献

全基因组测序在结核分枝杆菌常规诊断中的应用。

Use of WGS in Mycobacterium tuberculosis routine diagnosis.

作者信息

Cirillo Daniela M, Cabibbe Andrea M, De Filippo Maria Rosaria, Trovato Alberto, Simonetti Tullia, Rossolini Gian Maria, Tortoli Enrico

机构信息

Emerging Bacterial Pathogens Unit, San Raffaele Scientific Institute, Via Olgettina 60, Milan, Italy.

Emerging Bacterial Pathogens Unit, San Raffaele Scientific Institute, Via Olgettina 60, Milan, Italy.

出版信息

Int J Mycobacteriol. 2016 Dec;5 Suppl 1:S252-S253. doi: 10.1016/j.ijmyco.2016.09.053. Epub 2016 Nov 11.

Abstract

OBJECTIVE/BACKGROUND: Whole Genome Sequencing (WGS) is becoming affordable with overall costs comparable to other tests currently in use to perform the diagnosis of drug-resistant tuberculosis (TB) and cluster analysis. The WGS approach allows an "all-in-one" approach providing results on expected sensitivity of the strains, genetic background, epidemiological data, and indication of risk of laboratory cross-contamination.

METHODS

Although ideal, WGS from the direct diagnostic specimen is not yet standardized, and to date the two most promising approaches are WGS from early positive liquid culture and targeted sequencing from diagnostic specimens using Next-Generation Technology. Both have advantages and disadvantages. Sequencing from early MGIT requires positive cultures, whereas targeted sequencing can be performed from a specimen positive for Mycobacterium tuberculosis with a consistent gain in time to information. The aim of this study is to evaluate the feasibility and cost of using WGS with a centralized approach to speed up diagnosis of TB in a low-incidence country.

METHODS

From March 2016 to September 2016, we collected and processed by WGS 89 early positive routine MGIT960 tubes. Time to diagnosis and accuracy of this technique were compared with those of standard testing performed in a regular laboratory. A 2-mL aliquot of early positive MGIT was processed, starting with heat inactivation. DNA was then isolated by using the Maxwell 16 Cell DNA Purification Kit and Maxwell 16 MDx for automated extraction. Paired-end libraries of read-length 75-151bp were prepared using the Nextera XT DNA Sample Preparation kit, and sequenced on Illumina Miseq/Miniseq platform (based on the 1st available run). Total variant calling was performed according to the pipeline of the Phyresse web-tool. The DNA isolation step required 30min for inactivation plus 30min for extraction. The concentration obtained ranged from 0.1 to 1ng/μL, suitable for library preparation. Samples were sequenced with a turnaround time of 24-48h. The percentage of reads mapped to the H37Rv reference genome was 83% on average. The mean read coverage was 65×. The main challenge was the presence of nonmycobacterial DNA contamination in a variable amount. Lineage detection was possible for all cases, and mutations associated with drug resistance to antitubercular drugs were examined. We observed high diagnostic accuracy for species identification and detection of full drug resistance profile compared to standard DST testing performed in MGIT.

RESULTS

Two events of recent transmissions including respectively three and two patients were identified, and two laboratory cross-contaminations were investigated and confirmed based on the analysis. Time to availability of report was about 72h from MGIT positivity compared to up to 6-9weeks for XDR-TB diagnosis with standard testing. In addition to speed, the main advantages were the availability of a full prediction of resistance determinants for rifampicin-resistant cases, and the fast detection of potential cross-contaminations and clusters to guide epidemiological investigation and cross-border tracing. Cost analysis showed that the cost per strain was approximately €150 inclusive of staff cost, reagents, and machine cost.

CONCLUSION

WGS is a rapid, cost-effective technique that promises to integrate and replace the other tests in routine laboratories for an accurate diagnosis of DR-TB, although it is suitable nowadays for cultured samples only.

摘要

目的/背景:全基因组测序(WGS)的成本正在变得可承受,其总体成本与目前用于耐药结核病(TB)诊断和聚类分析的其他检测方法相当。WGS方法允许采用“一体化”方法,提供有关菌株预期敏感性、遗传背景、流行病学数据以及实验室交叉污染风险指示的结果。

方法

尽管理想,但直接诊断标本的WGS尚未标准化,迄今为止,两种最有前景的方法是早期阳性液体培养的WGS和使用下一代技术对诊断标本进行靶向测序。两者都有优缺点。早期MGIT测序需要阳性培养物,而靶向测序可以从结核分枝杆菌阳性标本中进行,在获取信息的时间上有持续的优势。本研究的目的是评估在低发病率国家采用集中式方法使用WGS加速结核病诊断的可行性和成本。

方法

2016年3月至2016年9月,我们通过WGS收集并处理了89份早期阳性常规MGIT960管。将该技术的诊断时间和准确性与常规实验室进行的标准检测进行比较。取2mL早期阳性MGIT等分试样进行处理,首先进行热灭活。然后使用Maxwell 16细胞DNA纯化试剂盒和Maxwell 16 MDx进行自动化提取以分离DNA。使用Nextera XT DNA样本制备试剂盒制备读长为75 - 151bp的双端文库,并在Illumina Miseq/Miniseq平台上测序(基于首次可用运行)。根据Phyresse网络工具的流程进行全变异检测。DNA分离步骤灭活需要30分钟,提取需要30分钟。获得的浓度范围为0.1至1ng/μL,适用于文库制备。样本测序周转时间为24 - 48小时。映射到H37Rv参考基因组的读数百分比平均为83%。平均读覆盖率为65倍。主要挑战是存在数量可变的非结核分枝杆菌DNA污染。所有病例均可进行谱系检测,并检查与抗结核药物耐药相关的突变。与MGIT中进行的标准DST检测相比,我们观察到在物种鉴定和全耐药谱检测方面具有较高的诊断准确性。

结果

确定了两起近期传播事件,分别涉及三名和两名患者,并根据分析调查并确认了两起实验室交叉污染事件。与标准检测诊断广泛耐药结核病长达6 - 9周相比,从MGIT阳性开始报告可用时间约为72小时。除了速度之外,主要优点是对于耐利福平病例可全面预测耐药决定因素,以及快速检测潜在的交叉污染和聚类以指导流行病学调查和跨境追踪。成本分析表明,每个菌株的成本约为150欧元,包括人员成本、试剂和机器成本。

结论

WGS是一种快速、具有成本效益的技术,有望在常规实验室中整合并取代其他检测方法以准确诊断耐多药结核病,尽管目前它仅适用于培养样本。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验