Aycan Mehmet Fatih, Tolunay Tolga, Demir Teyfik, Yaman Mesut Emre, Usta Yusuf
1 Department of Mechanical Engineering, Gazi University, Ankara, Turkey.
2 Department of Orthopaedics, Ankara Yildirim Beyazit University, Ankara, Turkey.
Proc Inst Mech Eng H. 2017 Feb;231(2):169-175. doi: 10.1177/0954411916687792. Epub 2017 Jan 18.
Aim of this study is to assess the pullout performance of various pedicle screws in different test materials. Polyurethane foams (Grade 10 and Grade 40) produced in laboratory and bovine vertebrae were instrumented with normal, cannulated (cemented), novel expandable and normal (cemented) pedicle screws. Test samples were prepared according to the ASTM F543 standard testing protocols and surgical guidelines. To examine the screw placement and cement distribution, anteriosuperior and oblique radiographs were taken from each sample after insertion process was completed. Pullout tests were performed in an Instron 3369 testing device. Load versus displacement graphs were recorded and the ultimate pullout force was defined as the maximum load (pullout strength) sustained before failure of screw. Student's t-test was performed on each group whether the differences between pullout strength of pedicle screws were significant or not. While normal pedicle screws have the lowest pullout strength in all test materials, normal pedicle screws cemented with polymethylmethacrylate exhibit significantly higher pullout performance than others. For all test materials, there is a significant improvement in pullout strength of normal screws by augmentation. While novel expandable pedicle screws with expandable poly-ether-ether-ketone shells exhibited lower pullout performance than normal screws cemented with polymethylmethacrylate, their pullout performances in all groups were higher than the ones of normal and cannulated pedicle screws. For all test materials, although cannulated pedicle screws exhibit higher pullout strength than normal pedicle screws, there are no significant differences between the two groups. The novel expandable pedicle screws with expandable poly-ether-ether-ketone shells may be used instead of normal and cannulated pedicle screws cemented with polymethylmethacrylate due to their good performances.
本研究的目的是评估不同测试材料中各种椎弓根螺钉的拔出性能。在实验室生产的聚氨酯泡沫(10级和40级)以及牛椎骨上分别植入普通、空心(骨水泥固定)、新型可膨胀和普通(骨水泥固定)椎弓根螺钉。测试样本根据ASTM F543标准测试方案和手术指南制备。为了检查螺钉植入情况和骨水泥分布,在插入过程完成后,从每个样本拍摄前后位和斜位X线片。拔出试验在Instron 3369测试装置中进行。记录载荷与位移曲线,将极限拔出力定义为螺钉失效前承受的最大载荷(拔出强度)。对每组椎弓根螺钉的拔出强度差异是否显著进行Student's t检验。在所有测试材料中,普通椎弓根螺钉的拔出强度最低,而用聚甲基丙烯酸甲酯骨水泥固定的普通椎弓根螺钉的拔出性能明显高于其他螺钉。对于所有测试材料,通过增强固定,普通螺钉的拔出强度有显著提高。虽然带有可膨胀聚醚醚酮外壳的新型可膨胀椎弓根螺钉的拔出性能低于用聚甲基丙烯酸甲酯骨水泥固定的普通螺钉,但其在所有组中的拔出性能均高于普通和空心椎弓根螺钉。对于所有测试材料,尽管空心椎弓根螺钉的拔出强度高于普通椎弓根螺钉,但两组之间无显著差异。由于其良好的性能,带有可膨胀聚醚醚酮外壳的新型可膨胀椎弓根螺钉可替代用聚甲基丙烯酸甲酯骨水泥固定的普通和空心椎弓根螺钉使用。