Dadashzadeh Behnam, Esmaeili Mohammad, Macnab Chris
Department of Mechatronics Engineering, School of Engineering Emerging Technologies, University of Tabriz, Tabriz, Iran.
Department of Electrical and Computer Engineering, University of Calgary, Calgary, Canada.
PLoS One. 2017 Jan 24;12(1):e0170122. doi: 10.1371/journal.pone.0170122. eCollection 2017.
This paper investigates generating symmetric trajectories for an underactuated biped during the stance phase of running. We use a point mass biped (PMB) model for gait analysis that consists of a prismatic force actuator on a massless leg. The significance of this model is its ability to generate more general and versatile running gaits than the spring-loaded inverted pendulum (SLIP) model, making it more suitable as a template for real robots. The algorithm plans the necessary leg actuator force to cause the robot center of mass to undergo arbitrary trajectories in stance with any arbitrary attack angle and velocity angle. The necessary actuator forces follow from the inverse kinematics and dynamics. Then these calculated forces become the control input to the dynamic model. We compare various center-of-mass trajectories, including a circular arc and polynomials of the degrees 2, 4 and 6. The cost of transport and maximum leg force are calculated for various attack angles and velocity angles. The results show that choosing the velocity angle as small as possible is beneficial, but the angle of attack has an optimum value. We also find a new result: there exist biped running gaits with double-hump ground reaction force profiles which result in less maximum leg force than single-hump profiles.
本文研究了欠驱动双足机器人在跑步支撑阶段生成对称轨迹的问题。我们使用一个点质量双足机器人(PMB)模型进行步态分析,该模型由一条无质量腿上的棱柱形力驱动器组成。该模型的重要意义在于,它能够生成比弹簧加载倒立摆(SLIP)模型更通用、更多样化的跑步步态,使其更适合作为真实机器人的模板。该算法规划必要的腿部驱动器力,以使机器人质心在支撑阶段以任意攻角和速度角经历任意轨迹。必要的驱动器力由逆运动学和动力学得出。然后,这些计算出的力成为动态模型的控制输入。我们比较了各种质心轨迹,包括一段圆弧以及2次、4次和6次多项式。针对各种攻角和速度角计算了运输成本和最大腿部力。结果表明,尽可能选择小的速度角是有益的,但攻角存在一个最优值。我们还发现了一个新结果:存在具有双峰地面反作用力分布的双足跑步步态,其产生的最大腿部力比单峰分布要小。