Kling Sabine, Hafezi Farhad
J Refract Surg. 2017 Feb 1;33(2):128-136. doi: 10.3928/1081597X-20161206-01.
To develop an algorithm to predict the stiffening effect of CXL and to verify the accuracy with results obtained from experimental measurements.
The algorithm considers different variables: the reaction kinetics of riboflavin diffusion and riboflavin photodegradation to determine the effective riboflavin concentration in different stromal layers; the oxygen diffusion and ultraviolet (UV) absorption to determine the amount of reactive oxygen species as a function of time and stromal depth. For the experimental comparison, corneas were deepithelialized, followed by riboflavin instillation for 30 minutes and UV irradiation. Different pulsed and continuous-light conditions were analyzed with irradiances ranging from 3 to 100 mW/cm and irradiation times from 8 to 30 minutes. Stress-relaxation measurements were performed in fresh-enucleated porcine (n = 66) and rabbit (n = 2) eyes directly after treatment, using a load of 0.6 MPa.
A clear linear relationship was observed between the concentration of newly induced cross-links and the experimentally observed stiffening factor (R = 0.9432). An additional 1 mol/m of cross-links increased the mechanical stress resistance of the cornea by 50.4%. The efficacy of standard CXL in murine, lapine, and porcine corneas was inversely related to corneal thickness. The stiffening effect after CXL decreased by 4.1% per 100 µm (R = 0.9961).
The proposed model, supported by data in porcine, murine, and lapine corneas, suggests a possibility of also predicting the biomechanical CXL efficacy in human corneas. The biomechanical efficacy of CXL may be increased by prolonged UV irradiation at reduced irradiances or by a higher oxygen pressure in the environment. Pulsed CXL does not accelerate CXL or increase its efficacy when compared to standard CXL of the same irradiation duration. This model might be used to calculate customized irradiation settings for high-risk cases, but also topography-guided CXL treatments. [J Refract Surg. 2017;33(2):128-136.].
开发一种算法来预测角膜交联术(CXL)的强化效果,并通过实验测量结果验证其准确性。
该算法考虑不同变量:核黄素扩散和核黄素光降解的反应动力学,以确定不同基质层中的有效核黄素浓度;氧扩散和紫外线(UV)吸收,以确定作为时间和基质深度函数的活性氧物种量。为了进行实验比较,对角膜进行上皮去除,然后滴注核黄素30分钟并进行紫外线照射。分析了不同的脉冲和连续光照条件,辐照度范围为3至100 mW/cm,照射时间为8至30分钟。在处理后立即对新鲜摘除的猪(n = 66)和兔(n = 2)眼施加0.6 MPa的负荷进行应力松弛测量。
新诱导的交联浓度与实验观察到的强化因子之间观察到明显的线性关系(R = 0.9432)。每增加1 mol/m的交联,角膜的机械应力抗性增加50.4%。标准CXL在小鼠、兔和猪角膜中的疗效与角膜厚度呈负相关。CXL后的强化效果每100 µm降低4.1%(R = 0.9961)。
该模型得到猪、小鼠和兔角膜数据的支持,表明有可能预测CXL在人角膜中的生物力学疗效。通过在较低辐照度下延长紫外线照射或通过环境中较高的氧压,可以提高CXL的生物力学疗效。与相同照射持续时间的标准CXL相比,脉冲CXL不会加速CXL或提高其疗效。该模型可用于计算高危病例的定制照射设置,也可用于地形引导的CXL治疗。[《屈光手术杂志》。2017;33(2):128 - 136。]