Khoshakhlagh Mohammad, Pirayesh Islamian Jalil, Abedi Seyyed Mohammad, Mahmoudian Babak, Shayesteh Azar Masoud
Department of Medical Physics, Faculty of Medicine, Tabriz University of Medical Sciences, Tabriz, Iran.
Nucl Med Rev Cent East Eur. 2017;20(1):10-14. doi: 10.5603/NMR.2017.0001.
Acquiring a high quality image has assigned an important concern for obtaining accurate diagnosis in nuclear medicine. Detector is a critical component of Single Photon Emission Computed Tomography (SPECT) imaging system for giving accurate information from exact pattern of radionuclide distribution in the target organ. The images are strongly affected by the attenuation, scattering, and response of the detector. The conventional detector is mainly made from sodium iodide activated by thallium [NaI(Tl)] in nuclear medicine imaging.
This study has planned to introduce a suitable for an optimized SPECT imaging. SIMIND Monte Carlo program was utilized for simulating a SPECT imaging system with a NaI(Tl) detector, and a low-energy high-resolution (LEHR) collimator.
The Planar and SPECT scans of a 99mTc point source and also an extended Cardiac-Torso (XCAT) computerized phantom with the experiment and simulated systems were prepared. After verification and validation of the simulated system, the similar scans of the phantoms were compared from the point of view of image quality for 7 scintillator crystals including: NaI(Tl), BGO, YAG:Ce, YAP:Ce, LuAG:Ce, LaBr3 and CZT. The parameters of energy and spatial resolution, and sensitivity of the systems were compared. Images were analyzed quantitatively by SSIM algorithm with Zhou Wang and Rouse/Hemami methods, and also qualitatively by two nuclear medicine specialists.
Energy resolutions of the mentioned crystals obtained were: 9.864, 9.8545, 10.229, 10.221, 10.230, 10.131and10.223 percentage for 99mTc photopeak 140 Kev, respectively. Finally, SSIM indexes for the related phantom images were calculated to 0.794, 0.738, 0.735, 0.607, 0.760 and 0.811 compared to the NaI(Tl) acquired images, respectively. Medical diagnosis of the SPECT images of the phantom showed that the system with BGO crystal potentially provides a better detectability for hot and cold lesions in the liver of XCAT phantom.
The results showed that BGO crystal has a high sensitivity and resolution, and also provides a better lesion detectability from the point of view of image quality on XCAT phantom.
获取高质量图像对于核医学中获得准确诊断至关重要。探测器是单光子发射计算机断层扫描(SPECT)成像系统的关键组件,用于从目标器官中放射性核素分布的确切模式给出准确信息。图像受到探测器的衰减、散射和响应的强烈影响。在核医学成像中,传统探测器主要由铊激活的碘化钠[NaI(Tl)]制成。
本研究计划引入一种适用于优化SPECT成像的方法。利用SIMIND蒙特卡罗程序模拟具有NaI(Tl)探测器和低能高分辨率(LEHR)准直器的SPECT成像系统。
制备了99mTc点源的平面和SPECT扫描图像,以及使用实验系统和模拟系统对扩展心脏躯干(XCAT)计算机模型进行扫描。在对模拟系统进行验证和确认后,从图像质量的角度比较了7种闪烁晶体(包括:NaI(Tl)、BGO、YAG:Ce、YAP:Ce、LuAG:Ce、LaBr3和CZT)对模型的类似扫描结果。比较了系统的能量和空间分辨率参数以及灵敏度。通过周王和劳斯/赫马米方法的结构相似性(SSIM)算法对图像进行定量分析,并由两位核医学专家进行定性分析。
对于99mTc 140 Kev光峰,上述晶体获得的能量分辨率分别为9.864%、9.8545%、10.229%、10.221%、10.230%、10.131%和10.223%。最后,与NaI(Tl)采集的图像相比,相关模型图像的SSIM指数分别计算为0.794、0.738、0.735、0.607、0.760和0.811。对模型SPECT图像的医学诊断表明,具有BGO晶体的系统可能为XCAT模型肝脏中的热区和冷区病变提供更好的可检测性。
结果表明,BGO晶体具有高灵敏度和分辨率,并且从XCAT模型图像质量的角度来看,也能提供更好的病变可检测性。