Suppr超能文献

壳依赖性光致发光研究为量子点的非灰色-开启转变提供了机制见解。

Shell-Dependent Photoluminescence Studies Provide Mechanistic Insights into the Off-Grey-On Transitions of Blinking Quantum Dots.

机构信息

Department of Chemistry and Biochemistry, University of Arkansas , 345 North Campus Drive, Fayetteville, Arkansas 72701, United States.

出版信息

ACS Nano. 2017 Mar 28;11(3):2905-2916. doi: 10.1021/acsnano.6b08040. Epub 2017 Feb 27.

Abstract

The majority of quantum dot (QD) blinking studies have used a model of switching between two distinct fluorescence intensity levels, "on" and "off". However, a distinct intermediate intensity level has been identified in some recent reports, a so-called "grey" or "dim" state, which has brought this binary model into question. While this grey state has been proposed to result from the formation of a trion, it is still unclear under which conditions it is present in a QD. By performing shell-dependent blinking studies on CdSe QDs, we report that the populations of the grey state and the on state are strongly dependent on both the shell material and its thickness. We found that adding a ZnS shell did not result in a significant population of the grey state. Using ZnSe as the shell material resulted in a slightly higher population of the grey state, although it was still poorly resolved. However, adding a CdS shell resulted in the population of a grey state, which depended strongly on its thickness up to 5 ML. Interestingly, while the frequency of transitions to and from the grey state showed a very strong dependence on CdS shell thickness, the brightness of and the dwell time in the grey state did not. Moreover, we found that the grey state acts as an on-pathway intermediate state between on and off states, with the thickness of the shell determining the transition probability between them. We also identified two types of blinking behavior in QDs, one that showed long-lived but lower intensity on states and another that showed short-lived but brighter on states that also depended on the shell thickness. Intensity-resolved single QD fluorescence lifetime analysis was used to identify the relationship between the various exciton decay pathways and the resulting intensity levels. We used this data to propose a model in which multiple on, grey, and off states exist whose equilibrium populations vary with time that give rise to the various intensity levels of single QDs and which depends on shell composition and thickness.

摘要

大多数量子点 (QD) 闪烁研究都使用了一种在两种不同荧光强度水平之间切换的模型,即“开”和“关”。然而,在最近的一些报告中,已经确定了一个明显的中间强度水平,即所谓的“灰色”或“暗淡”状态,这使得这种二元模型受到质疑。虽然这种灰色状态被认为是由形成三体形成的,但在 QD 中它存在的条件仍不清楚。通过对 CdSe QD 进行依赖于壳层的闪烁研究,我们报告说灰色状态和开状态的群体强烈依赖于壳层材料及其厚度。我们发现,添加 ZnS 壳层不会导致灰色状态的显著群体。使用 ZnSe 作为壳层材料会导致灰色状态的群体略有增加,尽管仍然不太明显。然而,添加 CdS 壳层会导致灰色状态的群体出现,其群体强烈依赖于其厚度,最高可达 5 ML。有趣的是,虽然向灰色状态和从灰色状态的跃迁频率与 CdS 壳层厚度有很强的依赖性,但灰色状态的亮度和停留时间并没有。此外,我们发现灰色状态作为开和关状态之间的中间途径的中间状态,壳层的厚度决定了它们之间的跃迁概率。我们还在 QD 中发现了两种类型的闪烁行为,一种表现为寿命较长但强度较低的开状态,另一种表现为寿命较短但强度较高的开状态,这两种状态也依赖于壳层厚度。强度分辨单量子点荧光寿命分析用于确定各种激子衰减途径与产生的强度水平之间的关系。我们使用这些数据提出了一个模型,其中存在多个开、灰和关状态,其平衡群体随时间变化,导致单量子点的各种强度水平,并取决于壳层组成和厚度。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验