Suppr超能文献

自硫杂萘联苯纳米石墨烯衍生的硫掺杂石墨烯薄膜的自下而上制备用于超高体积电容微超级电容器

Bottom-Up Fabrication of Sulfur-Doped Graphene Films Derived from Sulfur-Annulated Nanographene for Ultrahigh Volumetric Capacitance Micro-Supercapacitors.

机构信息

Dalian National Laboratory for Clean Energy, Dalian Institute of Chemical Physics, Chinese Academy of Sciences , 457 Zhongshan Road, Dalian 116023, China.

State Key Laboratory for Physical Chemistry of Solid Surfaces and Department of Chemistry College of Chemistry and Chemical Engineering, Xiamen University , 422 Siming South Road, Xiamen 361005, China.

出版信息

J Am Chem Soc. 2017 Mar 29;139(12):4506-4512. doi: 10.1021/jacs.7b00805. Epub 2017 Mar 17.

Abstract

Heteroatom doping of nanocarbon films can efficiently boost the pseudocapacitance of micro-supercapacitors (MSCs); however, wafer-scale fabrication of sulfur-doped graphene films with a tailored thickness and homogeneous doping for MSCs remains a great challenge. Here we demonstrate the bottom-up fabrication of continuous, uniform, and ultrathin sulfur-doped graphene (SG) films, derived from the peripherical trisulfur-annulated hexa-peri-hexabenzocoronene (SHBC), for ultrahigh-rate MSCs (SG-MSCs) with landmark volumetric capacitance. The SG film was prepared by thermal annealing of the spray-coated SHBC-based film, with assistance of a thin Au protecting layer, at 800 °C for 30 min. SHBC with 12 phenylthio groups decorated at the periphery is critical as a precursor for the formation of the continuous and ultrathin SG film, with a uniform thickness of ∼10.0 nm. Notably, the as-produced all-solid-state planar SG-MSCs exhibited a highly stable pseudocapacitive behavior with a volumetric capacitance of ∼582 F cm at 10 mV s, excellent rate capability with a remarkable capacitance of 8.1 F cm even at an ultrahigh rate of 2000 V s, ultrafast frequency response with a short time constant of 0.26 ms, and ultrahigh power density of ∼1191 W cm. It is noteworthy that these values obtained are among the best values for carbon-based MSCs reported to date.

摘要

杂原子掺杂纳米碳薄膜可以有效地提高微超级电容器(MSC)的赝电容;然而,对于 MSC 而言,具有定制厚度和均匀掺杂的硫掺杂石墨烯薄膜的晶圆级制造仍然是一个巨大的挑战。在这里,我们展示了由外围三硫环六并苯(SHBC)衍生而来的连续、均匀和超薄硫掺杂石墨烯(SG)薄膜的自下而上的制造方法,该薄膜用于超高倍率 MSC(SG-MSC),具有里程碑式的体积电容。通过在 800°C 下热退火喷涂 SHBC 基薄膜 30 分钟,并辅助一层薄的 Au 保护层,制备了 SG 薄膜。具有 12 个苯硫基外围装饰的 SHBC 是作为形成连续和超薄 SG 薄膜的前体的关键,其厚度均匀约为 10.0nm。值得注意的是,所生产的全固态平面 SG-MSC 表现出高度稳定的赝电容行为,在 10mV/s 时的体积电容约为 582F/cm,在超高的 2000V/s 速率下仍具有显著的电容 8.1F/cm,超快的频率响应具有 0.26ms 的短时间常数,以及超高的功率密度约为 1191W/cm。值得注意的是,这些获得的值是迄今为止报道的基于碳的 MSC 的最佳值之一。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验