Suppr超能文献

硫掺杂的卟啉碳纳米结构与非晶态 MoS 合成,用于酸性介质中的氧还原反应。

Sulfur-Doped Porphyrinic Carbon Nanostructures Synthesized with Amorphous MoS for the Oxygen Reduction Reaction in an Acidic Medium.

机构信息

Department of Chemical Engineering, Soongsil University, 369 Sangdo-ro, Dongjak-gu, Seoul, 06978, Republic of Korea.

出版信息

ChemSusChem. 2017 May 22;10(10):2202-2209. doi: 10.1002/cssc.201700147. Epub 2017 Apr 20.

Abstract

To develop doped carbon nanostructures as non-precious metal cathode catalysts, nanocomposites were synthesized by using SBA-15 and 5,10,15,20-tetrakis(4-methoxyphenyl)porphyrin-iron(III) chloride with different ratios of amorphous MoS precursor. From various analyses, it was found that, during pyrolysis at 900 °C under an N atmosphere, the amorphous MoS precursor decomposed into Mo and S, facilitating the formation of graphene sheet-like carbon with MoC and doping of sulfur in the carbon. In the nanocomposite formed from 10 wt % MoS precursor (denoted as Mo/S/PC-10), most of the MoS was decomposed, thus forming S-doped carbon, which was grown on the MoC phase without crystalline MoS . Furthermore, Mo/S/PC-10 exhibited better performance in the oxygen reduction reaction (specific activity of 1.23 mA cm at 0.9 V and half-wave potential of 0.864 V) than a commercial Pt catalyst, owing to a heteroatom-doped carbon nanostructure with a fairly high specific surface area. In the polarization curve of the unit-cell performance measured at 80 °C under ambient pressure, Mo/S/PC-10 as a cathode catalyst exhibited an optimal power density of 314 mW cm and a current density of 280 mA cm at 0.6 V.

摘要

为了开发掺杂碳纳米结构作为非贵金属阴极催化剂,使用 SBA-15 和 5,10,15,20-四(4-甲氧基苯基)卟啉-铁(III)氯化物与不同比例的非晶态 MoS 前体制备了纳米复合材料。通过各种分析发现,在 N 气氛下 900°C 下热解时,非晶态 MoS 前体分解为 Mo 和 S,有利于形成具有 MoC 和掺杂 S 的石墨烯片状碳。在由 10wt% MoS 前体(表示为 Mo/S/PC-10)形成的纳米复合材料中,大部分 MoS 被分解,从而形成 S 掺杂的碳,它在没有结晶 MoS 的情况下生长在 MoC 相上。此外,Mo/S/PC-10 在氧还原反应(0.9V 时的比活性为 1.23mA/cm,半波电位为 0.864V)中的性能优于商业 Pt 催化剂,这归因于具有相当高比表面积的杂原子掺杂碳纳米结构。在环境压力下 80°C 测量的单元电池性能的极化曲线中,作为阴极催化剂的 Mo/S/PC-10 在 0.6V 时表现出最佳的功率密度为 314mW/cm 和电流密度为 280mA/cm。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验