Suppr超能文献

术中通过影像学测定输尿管长度以确定理想支架长度的方法

Intraoperative Radiographic Determination of Ureteral Length as a Method of Determining Ideal Stent Length.

作者信息

Barrett Keith, Ghiculete Daniela, Sowerby Robert J, Farcas Monica, Pace Kenneth T, Honey Richardson John D'Arcy

机构信息

Division of Urology, St. Michael's Hospital, University of Toronto , Toronto, Ontario.

出版信息

J Endourol. 2017 Apr;31(S1):S101-S105. doi: 10.1089/end.2016.0709. Epub 2017 Mar 17.

Abstract

INTRODUCTION

Accurate determination of ureteral length (UL) and appropriate stent length remains a challenge. The objective of this study was to describe an intraoperative technique to measure UL and determine appropriate stent length, and to compare this technique with other methods of determining appropriate stent length.

METHODS

Patients undergoing ureteroscopy requiring postoperative stenting and who had a preoperative CT were prospectively identified. Gender, age, height, body mass index, L1 to L5 lumbar height on CT, and surgeon's estimate of UL were recorded. UL was measured using four methods: direct measurement with a ureteral catheter, ureteropelvic junction (UPJ) to ureterovesical junction distance on axial and coronal CT, and using a novel intraoperative radiographic technique. Radiographic measurement was performed using a radiographic nipple marker affixed to the skin over the ureteral orifice (UO) and an angiographic catheter with radiopaque markings at 1 cm intervals. UL was the distance from the UPJ to the marker at the UO measured using the catheter markers. Correlation between direct measurement and the recorded variables and methods of ureteral measurement were calculated. Stent length was chosen based on radiographic measurement. Stents were deemed of appropriate length if they showed a proximal coil in the renal pelvis and a distal coil in the bladder without crossing midline.

RESULTS

Twenty-five ureters from 23 patients were included. Radiographically measured UL was strongly correlated with direct measurement. (r = 0.873, p < 0.01). Coronal and axial CT ULs were significantly associated with direct measurement (p < 0.05). Height, lumbar height, and surgeon's estimate of UL were not. Stents were deemed of appropriate length in 23/25 cases (92%).

CONCLUSIONS

This new method for radiographic UL measurement is strongly correlated with directly measured UL. A length of stent chosen based on radiographic UL resulted in an appropriate stent length.

摘要

引言

准确测定输尿管长度(UL)并确定合适的支架长度仍然是一项挑战。本研究的目的是描述一种术中测量UL并确定合适支架长度的技术,并将该技术与其他确定合适支架长度的方法进行比较。

方法

前瞻性纳入接受输尿管镜检查且术后需要留置支架且术前行CT检查的患者。记录患者的性别、年龄、身高、体重指数、CT上L1至L5椎体高度以及外科医生对UL的估计值。使用四种方法测量UL:用输尿管导管直接测量、通过轴向和冠状位CT测量肾盂输尿管连接部(UPJ)至输尿管膀胱连接部的距离,以及使用一种新的术中放射成像技术。放射成像测量是通过将一个放射性乳头标记物固定在输尿管口(UO)上方的皮肤上,并使用每隔1厘米有不透射线标记的血管造影导管来进行的。UL是使用导管标记物测量的从UPJ到UO处标记物的距离。计算直接测量值与记录变量以及输尿管测量方法之间的相关性。根据放射成像测量结果选择支架长度。如果支架在肾盂中显示近端盘绕且在膀胱中显示远端盘绕且未越过中线,则认为支架长度合适。

结果

纳入了23例患者的25条输尿管。放射成像测量的UL与直接测量值高度相关(r = 0.873,p < 0.01)。冠状位和轴向CT测量的UL与直接测量值显著相关(p < 0.05)。身高、椎体高度和外科医生对UL的估计值则不然。25例中有23例(92%)的支架被认为长度合适。

结论

这种新的放射成像测量UL的方法与直接测量的UL高度相关。根据放射成像测量的UL选择的支架长度是合适的。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验