Aggarwal Neeraj Kumar, Goyal Varsha, Saini Anita, Yadav Anita, Gupta Ranjan
Department of Microbiology, Kurukshetra University, Kurukshetra, Haryana, 136119, India.
Department of Biotechnology, Kurukshetra University, Kurukshetra, Haryana, India.
3 Biotech. 2017 Jul;7(3):158. doi: 10.1007/s13205-017-0755-0. Epub 2017 Jun 16.
Alkali-assisted acid pretreated rice straw was saccharified using cellulase from Aspergillus niger BK01. The cellulase production by the fungus was enhanced by parametric optimization using solid-state fermentation conditions. Maximum cellulase production (12.0 U/gds of carboxymethyl cellulase, CMCase) was achieved in 96 h, using 6.0% substrate concentration, 7.5% inoculum concentration, 1:2 solid to liquid ratio, at pH 5.5, and temperature 28 °C, by supplementation of the fermentation medium with 0.1% carboxymethylcellulose and 0.1% ammonium nitrate. Characterization of crude cellulases showed that highest CMCase activity was observed at pH 4.8 and temperature 40 °C. The CMCase was stable from pH 4.8-5.5 and at a temperature range of 35-50 °C. The pretreated biomass was subjected to hydrolysis with the fungal cellulases. The saccharification optimization studies showed that 2% (v/v) enzyme concentration and hydrolysis time of 2.5 h were optimum for maximum yield, i.e, 23.78% sugars and 35.96% saccharification value.
使用黑曲霉BK01产生的纤维素酶对碱辅助酸预处理的稻草进行糖化。通过固态发酵条件下的参数优化提高了该真菌的纤维素酶产量。通过在发酵培养基中添加0.1%的羧甲基纤维素和0.1%的硝酸铵,在底物浓度6.0%、接种物浓度7.5%、固液比1:2、pH 5.5和温度28°C的条件下,96小时内实现了最大纤维素酶产量(12.0 U/gds的羧甲基纤维素酶,CMCase)。粗纤维素酶的表征表明,在pH 4.8和温度40°C时观察到最高的CMCase活性。CMCase在pH 4.8 - 5.5和35 - 50°C的温度范围内稳定。用真菌纤维素酶对预处理后的生物质进行水解。糖化优化研究表明,2%(v/v)酶浓度和2.5小时的水解时间是获得最大产量的最佳条件,即23.78%的糖和35.96%的糖化值。