Suppr超能文献

由NRRL-B199从甘油生产1,3-丙二醇。培养基组成及操作条件。

1,3-Propanediol production by NRRL-B199 from glycerol. Medium composition and operational conditions.

作者信息

Wojtusik Mateusz, Rodríguez Alberto, Ripoll Vanessa, Santos Victoria E, García José L, García-Ochoa Félix

机构信息

Departamento de Ingeniería Química, Universidad Complutense, Madrid, Spain.

出版信息

Biotechnol Rep (Amst). 2015 Mar 17;6:100-107. doi: 10.1016/j.btre.2014.12.010. eCollection 2015 Jun.

Abstract

Production of 1,3-propanediol from glycerol using NRRL-B199 has been studied. Medium composition has been optimized by means of a statistical design based on the Taguchi method. Strong influences of glycerol and phosphate concentrations have been detected on biomass and product yields. Other factors, such as magnesium concentration and K:Na ratio, have shown a small influence on both responses, biomass and product concentrations. An optimized medium composition has been proposed, leading to a final 1,3-propanediol concentration of 12.4 g/L with a selectivity of 72% with respect to glycerol consumed at shaken bottle-scale. Once the medium composition had been optimized, the scale-up from shaken bottles to STBR was conducted. Several experiments in a 2 L STBR have been conducted in order to determine the best operating conditions concerning temperature and agitation. Under the best operating conditions, i.e., a programmed variable stirring rate ranging from 50 to 100 rpm and a temperature of 37 °C, a final concentration of 13.5 g/L of 1,3-propanediol with a selectivity of 86% with respect to the glycerol consumed was obtained.

摘要

对利用NRRL - B199从甘油生产1,3 - 丙二醇进行了研究。借助基于田口方法的统计设计对培养基成分进行了优化。已检测到甘油和磷酸盐浓度对生物量和产物产量有强烈影响。其他因素,如镁浓度和钾钠比,对生物量和产物浓度这两个响应指标的影响较小。已提出一种优化的培养基成分,在摇瓶规模下,最终1,3 - 丙二醇浓度达到12.4 g/L,相对于消耗的甘油选择性为72%。一旦培养基成分优化后,进行了从摇瓶到搅拌釜式生物反应器(STBR)的放大实验。在2 L的STBR中进行了若干实验,以确定关于温度和搅拌的最佳操作条件。在最佳操作条件下,即程序控制的可变搅拌速率为50至100 rpm且温度为37°C时,获得了最终浓度为13.5 g/L的1,3 - 丙二醇,相对于消耗的甘油选择性为86%。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验