Suppr超能文献

使用拉曼微光谱法从微流控中获得多组分扩散系数。

Multicomponent diffusion coefficients from microfluidics using Raman microspectroscopy.

机构信息

Chair of Technical Thermodynamics, RWTH Aachen University, 52056 Aachen, Germany.

出版信息

Lab Chip. 2017 Aug 8;17(16):2768-2776. doi: 10.1039/c7lc00433h.

Abstract

Diffusion is slow. Thus, diffusion experiments are intrinsically time-consuming and laborious. Additionally, the experimental effort is multiplied for multicomponent systems as the determination of multicomponent diffusion coefficients typically requires several experiments. To reduce the experimental effort, we present the first microfluidic diffusion measurement method for multicomponent liquid systems. The measurement setup combines a microfluidic chip with Raman microspectroscopy. Excellent agreement between experimental results and literature data is achieved for the binary system cyclohexane + toluene and the ternary system 1-propanol + 1-chlorobutane + heptane. The Fick diffusion coefficients are obtained from fitting a multicomponent convection-diffusion model to the mole fractions measured in experiments. Ternary diffusion coefficients can be obtained from a single experiment; high accuracy is already obtained from two experiments. Advantages of the presented measurement method are thus short measurement times, reduced sample consumption, and less experiments for the determination of a multicomponent diffusion coefficient.

摘要

扩散是缓慢的。因此,扩散实验本质上是耗时且费力的。此外,对于多组分系统,实验工作量会增加,因为确定多组分扩散系数通常需要进行多次实验。为了减少实验工作量,我们提出了用于多组分液体系统的第一种微流控扩散测量方法。该测量设置将微流控芯片与拉曼显微镜结合使用。对于二元体系环己烷+甲苯和三元体系 1-丙醇+1-氯丁烷+庚烷,实验结果与文献数据之间达到了极好的一致性。通过将多组分对流-扩散模型拟合到实验中测量的摩尔分数,得到菲克扩散系数。从单个实验中可以获得三元扩散系数;从两个实验中已经可以获得高精度。因此,所提出的测量方法的优点是测量时间短、样品消耗少以及确定多组分扩散系数所需的实验次数少。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验