Thompson R Adam, Trinh Cong T
Bredesen Center for Interdisciplinary Research and Graduate Education, The University of Tennessee, Knoxville and Oak Ridge National Laboratory, Oak Ridge, Tennessee.
BioEnergy Science Center, Oak Ridge National Laboratory, Oak Ridge, Tennessee.
Biotechnol Bioeng. 2017 Nov;114(11):2592-2604. doi: 10.1002/bit.26374. Epub 2017 Aug 15.
As a model thermophilic bacterium for the production of second-generation biofuels, the metabolism of Clostridium thermocellum has been widely studied. However, most studies have characterized C. thermocellum metabolism for growth at relatively low substrate concentrations. This outlook is not industrially relevant, however, as commercial viability requires substrate loadings of at least 100 g/L cellulosic materials. Recently, a wild-type C. thermocellum DSM1313 was cultured on high cellulose loading batch fermentations and reported to produce a wide range of fermentative products not seen at lower substrate concentrations, opening the door for a more in-depth analysis of how this organism will behave in industrially relevant conditions. In this work, we elucidated the interconnectedness of overflow metabolism and growth cessation in C. thermocellum during high cellulose loading batch fermentations (100 g/L). Metabolic flux and thermodynamic analyses suggested that hydrogen and formate accumulation perturbed the complex redox metabolism and limited conversion of pyruvate to acetyl-CoA conversion, likely leading to overflow metabolism and growth cessation in C. thermocellum. Pyruvate formate lyase (PFL) acts as an important redox valve and its flux is inhibited by formate accumulation. Finally, we demonstrated that manipulation of fermentation conditions to alleviate hydrogen accumulation could dramatically alter the fate of pyruvate, providing valuable insight into process design for enhanced C. thermocellum production of chemicals and biofuels. Biotechnol. Bioeng. 2017;114: 2592-2604. © 2017 Wiley Periodicals, Inc.
作为用于生产第二代生物燃料的典型嗜热细菌,热纤梭菌的代谢已得到广泛研究。然而,大多数研究是在相对低底物浓度下对热纤梭菌的代谢进行表征,以研究其生长情况。然而,这种情况在工业上并不相关,因为商业可行性要求纤维素材料的底物负载量至少为100 g/L。最近,一株野生型热纤梭菌DSM1313在高纤维素负载的分批发酵中进行培养,据报道产生了一系列在较低底物浓度下未见到的发酵产物,这为更深入分析该生物体在工业相关条件下的行为打开了大门。在这项工作中,我们阐明了热纤梭菌在高纤维素负载分批发酵(100 g/L)过程中溢流代谢与生长停止之间的相互联系。代谢通量和热力学分析表明,氢气和甲酸盐的积累扰乱了复杂的氧化还原代谢,并限制了丙酮酸向乙酰辅酶A的转化,这可能导致热纤梭菌的溢流代谢和生长停止。丙酮酸甲酸裂解酶(PFL)作为一个重要的氧化还原阀,其通量受到甲酸盐积累的抑制。最后,我们证明了通过控制发酵条件来减轻氢气积累可以显著改变丙酮酸的去向,这为优化热纤梭菌化学品和生物燃料生产的工艺设计提供了有价值的见解。《生物技术与生物工程》2017年;114:2592 - 2604。© 2017威利期刊公司