Department of Ophthalmology, Rabin Medical Center, Petach Tikva, Israel.
Sackler Faculty of Medicine, Tel Aviv University, Tel Aviv, Israel.
Clin Exp Ophthalmol. 2018 Apr;46(3):275-279. doi: 10.1111/ceo.13017. Epub 2017 Aug 17.
In this study, we examined a novel variant of 'big-bubble' deep anterior lamellar keratoplasty using trypan-blue-stained viscoelastic device for the creation of a pre-descemetic bubble.
Ten corneoscleral rims were mounted on an artificial anterior chamber (AC). The AC was filled with air through a limbal paracentesis. A Melles' triangulated spatula was inserted through the paracentesis, with its tip penetrating the AC, was then slightly retracted and pushed into the deep stroma above the roof of the paracentesis. A mixture of trypan blue and viscoelastic device (Healon, Abbott Medical Optics, Abbott Park, Illinois) was injected into this intra-stromal pocket using a 27-G cannula to create a pre-descemetic separation bubble. Bubble type and visualization of dyed viscoelastic device were noted. The method was later employed in three cases.
In all 10 corneoscleral rims, the technique successfully created a visible pre-descemetic (type 1) bubble that could be expanded up to the predicted diameter of trephination. Subsequent trephination and the removal of corneal stroma were uneventful. In two out of four clinical cases, a type 1 bubble was created, while in two others, visco-dissection failed and dyed viscoelastic was seen in the AC.
The presented technique holds promise of being a relatively easy to perform, predictable and well-controlled alternative for achieving a type 1 bubble during deep anterior lamellar keratoplasty surgery. The trypan-blue-stained viscoelastic device facilitates proper visualization and control of the separation bubble and assists in identifying the penetrance to the separation bubble prior to removal of the stromal cap.
在这项研究中,我们使用染有台盼蓝的黏弹剂制作预前弹力层下分离泡,检查了一种新型的“大泡”深板层角膜移植术。
将 10 个角膜缘环装在人工前房(AC)上。通过角巩膜缘穿刺术向 AC 中注入空气。用 Melles 三角刮刀通过穿刺口插入,尖端穿透 AC,然后稍微缩回并推入穿刺口上方的深基质中。用 27-G 套管将混合有台盼蓝和黏弹剂(Healon,Abbott Medical Optics,Abbott Park,Illinois)的混合物注入该基质囊中,以形成预前弹力层下分离泡。记录泡的类型和可见的染色黏弹剂。该方法后来在 3 例中使用。
在所有 10 个角膜缘环中,该技术均成功地形成了可见的预前弹力层下(1 型)分离泡,该泡可扩展至预计的环钻直径。随后的环钻和角膜基质的切除均顺利进行。在 4 例临床病例中,有 2 例形成了 1 型泡,而另外 2 例黏弹分离失败,染色黏弹剂出现在 AC 中。
所提出的技术具有成为一种相对容易执行、可预测和可控制的替代方法的潜力,可在深板层角膜移植术中实现 1 型泡。染有台盼蓝的黏弹剂有助于分离泡的正确可视化和控制,并有助于在切除基质帽之前确定分离泡的穿透性。