Institute of Solid Mechanics, Technische Universität Braunschweig, Braunschweig D-38106, Germany.
Institute of Sport and Motion Science, University of Stuttgart, Stuttgart D-70569, Germany.
J Mech Behav Biomed Mater. 2017 Nov;75:128-146. doi: 10.1016/j.jmbbm.2017.03.034. Epub 2017 Apr 12.
The urinary bladder is a central organ of vertebrates and imposes, based on its extreme deformation (volume changes up to several 100%), special requirements on the overall bladder tissue. However, studies focusing on three-dimensional modelling of bladder deformation and bladder function during micturition are rare. Based on three fields, namely, the membrane potential, calcium concentration, and placement, a mechano-electrochemical-coupled, three-dimensional model describing the contractile behaviour of urinary bladder smooth muscle is presented using a strain energy function. The strain energy functions for the different layers of the bladder wall are additively decomposed into a passive part comprising elastin, the extracellular matrix (ECM), and collagen and an active electrochemical-driven part comprising the contraction of smooth muscle cells (SMC). While the two-variable FitzHugh-Nagumo-type membrane model (FitzHugh, 1961; Nagumo et al., 1962) has been used to describe the membrane potential characteristics, the four-state, cross-bridge model of Hai and Murphy (1988) is implemented into the finite element method for the quantification of the calcium phase. Appropriate model parameters were determined experimentally using 40 tissue strips isolated from porcine bladders. Characteristic orientation-dependent passive and active stress-stretch relationships were identified for muscle strips, including the entire bladder wall structure and those featuring the isolated muscle layer only. Active experiments on the smooth muscle layers revealed higher stresses in the longitudinal (28.9kPa) direction than in the transversal (22.7kPa) one. Additionally, three-dimensional deformation characteristics were recorded from single muscle strips to qualitatively confirm the strip simulations. Three-dimensional simulations at the tissue strip level and the organ level were performed to analyse the interaction among the electrical action potential, calcium distribution, chemical degree of activation, and equivalent von Mises stress.
膀胱是脊椎动物的一个重要器官,其极度变形(体积变化可达数倍)对整个膀胱组织提出了特殊的要求。然而,目前专注于尿动力学过程中膀胱变形和功能的三维建模研究仍然很少。本研究基于膜电位、钙离子浓度和位置三个方面,使用应变能函数,提出了一个机械-电化学耦合的三维模型,用于描述膀胱平滑肌的收缩行为。膀胱壁各层的应变能函数可被分解为被动部分和主动电化学驱动部分,其中被动部分包括弹性蛋白、细胞外基质(ECM)和胶原,主动部分包括平滑肌细胞(SMC)的收缩。尽管已使用双变量 FitzHugh-Nagumo 型膜模型(FitzHugh,1961;Nagumo 等人,1962)来描述膜电位特性,但 Hai 和 Murphy(1988)的四状态交联桥模型已被实现到有限元方法中,用于定量分析钙相。使用从猪膀胱中分离出的 40 个组织条,通过实验确定了适当的模型参数。针对肌肉条带(包括整个膀胱壁结构和仅具有分离的肌肉层的结构),确定了特征性的各向异性被动和主动应力-应变关系。对平滑肌层进行的主动实验表明,在纵向(28.9kPa)方向上的应力高于横向(22.7kPa)方向。此外,还从单个肌肉条带记录了三维变形特征,以定性地证实条带模拟。在组织条带水平和器官水平上进行了三维模拟,以分析电动作电位、钙分布、化学激活程度和等效 von Mises 应力之间的相互作用。