Borsdorf Mischa, Tomalka André, Stutzig Norman, Morales-Orcajo Enrique, Böl Markus, Siebert Tobias
Institute for Sport and Exercise Science, Department of Movement and Exercise Science, University of Stuttgart, Stuttgart, Germany.
Institute of Solid Mechanics, Department of Mechanical Engineering, Technical University of Braunschweig, Braunschweig, Germany.
Front Physiol. 2019 Feb 6;10:63. doi: 10.3389/fphys.2019.00063. eCollection 2019.
The urinary bladder is a distensible hollow muscular organ, which allows huge changes in size during absorption, storage and micturition. Pathological alterations of biomechanical properties can lead to bladder dysfunction and loss in quality of life. To understand and treat bladder diseases, the mechanisms of the healthy urinary bladder need to be determined. Thus, a series of studies focused on the detrusor muscle, a layer of urinary bladder made of smooth muscle fibers arranged in longitudinal and circumferential orientation. However, little is known about whether its active muscle properties differ depending on location and direction. This study aimed to investigate the porcine bladder for heterogeneous (six different locations) and anisotropic (longitudinal vs. circumferential) contractile properties including the force-length-(FLR) and force-velocity-relationship (FVR). Therefore, smooth muscle tissue strips with longitudinal and circumferential direction have been prepared from different bladder locations (apex dorsal, apex ventral, body dorsal, body ventral, trigone dorsal, trigone ventral). FLR and FVR have been determined by a series of isometric and isotonic contractions. Additionally, histological analyses were conducted to determine smooth muscle content and fiber orientation. Mechanical and histological examinations were carried out on 94 and 36 samples, respectively. The results showed that maximum active stress ( ) of the bladder strips was higher in the longitudinal compared to the circumferential direction. This is in line with our histological investigation showing a higher smooth muscle content in the bladder strips in the longitudinal direction. However, normalization of maximum strip force by the cross-sectional area (CSA) of smooth muscle fibers yielded similar smooth muscle maximum stresses (165.4 ± 29.6 kPa), independent of strip direction. Active muscle properties (FLR, FVR) showed no locational differences. The trigone exhibited higher passive stress ( ) than the body. Moreover, the bladder exhibited greater in the longitudinal than circumferential direction which might be attributed to its microstructure (more longitudinal arrangement of muscle fibers). This study provides a valuable dataset for the development of constitutive computational models of the healthy urinary bladder. These models are relevant from a medical standpoint, as they contribute to the basic understanding of the function of the bladder in health and disease.
膀胱是一个可扩张的中空肌肉器官,在尿液吸收、储存和排尿过程中,其大小会发生巨大变化。生物力学特性的病理改变可导致膀胱功能障碍和生活质量下降。为了理解和治疗膀胱疾病,需要确定健康膀胱的机制。因此,一系列研究聚焦于逼尿肌,它是膀胱的一层由纵向和圆周方向排列的平滑肌纤维组成的组织。然而,对于其主动肌肉特性是否因位置和方向而异,人们知之甚少。本研究旨在研究猪膀胱在不同位置(六个不同部位)和不同方向(纵向与圆周方向)的收缩特性,包括力-长度关系(FLR)和力-速度关系(FVR)。因此,从膀胱的不同部位(膀胱顶背侧、膀胱顶腹侧、膀胱体背侧、膀胱体腹侧、膀胱三角背侧、膀胱三角腹侧)制备了纵向和圆周方向的平滑肌组织条。通过一系列等长和等张收缩来测定FLR和FVR。此外,进行组织学分析以确定平滑肌含量和纤维方向。分别对94个样本进行了力学检查,对36个样本进行了组织学检查。结果表明,膀胱条的最大主动应力( )在纵向方向上高于圆周方向。这与我们的组织学研究结果一致,该研究表明纵向膀胱条中的平滑肌含量更高。然而,通过平滑肌纤维的横截面积(CSA)对最大条带力进行归一化处理后,得到了相似的平滑肌最大应力(165.4±29.6 kPa),与条带方向无关。主动肌肉特性(FLR、FVR)没有位置差异。膀胱三角区的被动应力( )高于膀胱体。此外,膀胱在纵向方向上的 大于圆周方向,这可能归因于其微观结构(肌肉纤维更多地呈纵向排列)。本研究为健康膀胱本构计算模型的开发提供了有价值的数据集。这些模型从医学角度来看具有相关性,因为它们有助于对膀胱在健康和疾病状态下的功能有基本的了解。