Matsumoto Michinori, Wakiyama Shigeki, Shiba Hiroaki, Ishida Yuichi, Kita Yoshiaki, Yanaga Katsuhiko
Division of Hepato-Biliary-Pancreatic Surgery, Department of Surgery, The Jikei University School of Medicine, 3-25-8 Nishi-shinbashi, Minato-ku, Tokyo, 105-8461, Japan.
Surg Case Rep. 2017 Dec;3(1):87. doi: 10.1186/s40792-017-0359-2. Epub 2017 Jul 28.
The evaluation of the hepatic vascular anatomy in living liver donors is increasingly being performed by three-dimensional (3D) computed tomography (CT) angiography. However, details of hepatic artery anatomy obtained by 3D CT angiography are not always superior to those obtained by angiography. Here, we report a case in which the 3D image navigation system helped to detect segment II, III, and IV arteries (A2, A3, and A4, respectively) that individually originated from the proper hepatic artery (PHA); this could not be detected by 3D CT angiography.
A 46-year-old man with end-stage primary biliary cirrhosis was admitted to our hospital for evaluation as a candidate for living donor liver transplantation. The patient's younger sister, aged 43 years, was the only living donor candidate. The predicted left liver graft volume with the middle hepatic vein was found to be 403 mL using the region-growing method with 3D CT software. This volume was sufficiently large for the recipient because the standard liver volume of the recipient was 1095 mL. 3D CT angiography was performed twice but could not reveal the anatomical structure of the left and middle hepatic arteries. However, simulation using the region-growing method demonstrated individual branching off of A2, A3, and A4 from the PHA; conventional angiography demonstrated the same results. Each branch was approximately 1 mm in diameter, which was too small for secure anastomosis. Therefore, we selected the right liver graft for simplicity. The postoperative course of the donor and recipient was uneventful, and they were discharged on postoperative days 10 and 46, respectively.
In conclusion, reconstruction of the hepatic vasculature using the 3D software by region-growing method might be a useful adjunct for surgical planning in the evaluation of the hepatic arteries in living liver donors.
在活体肝供体中,对肝血管解剖结构的评估越来越多地通过三维(3D)计算机断层扫描(CT)血管造影来进行。然而,通过3D CT血管造影获得的肝动脉解剖细节并不总是优于血管造影获得的细节。在此,我们报告一例,其中3D图像导航系统有助于检测分别发自肝固有动脉(PHA)的第II、III和IV段动脉(分别为A2、A3和A4);这是3D CT血管造影无法检测到的。
一名46岁终末期原发性胆汁性肝硬化男性因评估是否适合作为活体肝移植供体入院。患者43岁的妹妹是唯一的活体供体候选人。使用3D CT软件的区域生长法,发现包含肝中静脉的预测左肝移植体积为403 mL。由于受体的标准肝脏体积为1095 mL,该体积对受体来说足够大。进行了两次3D CT血管造影,但未能显示左肝动脉和肝中动脉的解剖结构。然而,使用区域生长法进行的模拟显示A2、A3和A4从PHA单独分支;传统血管造影显示了相同结果。每个分支直径约为1 mm,对于安全吻合来说太小。因此,为简化起见,我们选择了右肝移植。供体和受体术后过程顺利,分别于术后第10天和第46天出院。
总之,通过区域生长法使用3D软件重建肝血管系统可能是评估活体肝供体肝动脉时手术规划的有用辅助手段。