College of Physics and Materials Science, Henan Normal University, Xinxiang 453007, China.
College of Physics and Materials Science, Henan Normal University, Xinxiang 453007, China.
J Hazard Mater. 2018 Jan 5;341:93-101. doi: 10.1016/j.jhazmat.2017.07.052. Epub 2017 Jul 25.
There is very little scientific understanding of photoexcitation effect on the adsorption properties of adsorbent. The adsorption of four hazardous gases (SARIN (propan-2-ylmethylphospho-nofluoridate), methyl dichlorophosphate (MDCP), trimethyl phosphate (TMP) and hydrogen sulfide (HS)) on silica surface is taken as target sample in this work. The adsorption energy order (MDCP<SARIN<TMP) in the ground state is consistent with the strength order of intermolecular hydrogen bond (inter-HB) between hydroxyl group of silica surface and hazardous gas, and the desorption order of the three gases in previous reports. However, with the adsorption energy increase of MDCP and the decrease of SARIN and TMP, this order changes remarkably to SARIN<TMP<MDCP after photoexcitation to excited state by absorbing shortwave ultraviolet irradiation. This change is opposite to the inter-HB weakening of MDCP in the first excited (S) state and the strengthening of TMP and SARIN in the second excited (S) state. This opposite change is caused by formation of intermolecular charge transfer state of MDCP and local excitation of SARIN and TMP. The HS is dissociated after photoexcitation to the S state. This work presents photoexcitation as a new standard for the design and detection of adsorption properties of adsorbent for its striking effect on adsorption behaviors.
目前对于光激发效应对吸附剂吸附性能的影响,科学界的了解还非常有限。本工作以硅烷表面吸附四种危险气体(沙林(异丙基甲基膦酸酯)、甲基二氯膦酸酯(MDCP)、三甲基磷酸酯(TMP)和硫化氢(HS))为目标样本。在基态下,吸附能的顺序(MDCP<SARIN<TMP)与硅烷表面羟基与危险气体之间的分子间氢键(inter-HB)强度顺序一致,也与之前报道中三种气体的解吸顺序一致。然而,在光激发到激发态后,随着 MDCP 吸附能的增加和 SARIN 和 TMP 吸附能的降低,这种顺序发生了显著变化,变为 SARIN<TMP<MDCP。这种变化与 MDCP 在第一激发(S)态下 inter-HB 的减弱以及 TMP 和 SARIN 在第二激发(S)态下的增强相反。这种相反的变化是由 MDCP 形成分子间电荷转移态以及 SARIN 和 TMP 的局域激发引起的。HS 在光激发到 S 态后发生解离。这项工作提出了光激发作为吸附剂吸附性能设计和检测的新标准,因为它对吸附行为具有显著影响。