Colusso A C, Cortie M B, Dowd A, McDonagh A M
Institute for Nanoscale Technology, University of Technology Sydney, PO Box 123, Broadway, NSW 2007, Australia.
Dalton Trans. 2017 Aug 22;46(33):11053-11062. doi: 10.1039/c7dt02073b.
A hybrid surfactant/polyoxometalate compound was synthesized by combining isopolytungstate anions with the cationic surfactant cetyltrimethylammonium bromide (CTA-Br) to produce a hierarchical compound that we identify as (CTA)[HWO]Cl·2HO. At room temperature the compound consisted of hexagonally ordered sheets of Keggin ions, with an intervening gallery containing alkyl-chains of the organic cations. The synthesis was highly dependent on solution pH, reaction time and the order in which the reactants were added. We examined the effect of temperature on the stability of (CTA)[HWO]Cl·2HO using thermal gravimetric analysis, differential scanning calorimetry, FT-IR spectroscopy and in situ synchrotron X-ray diffraction, and found a step-wise conversion to monoclinic WOvia a series of intermediates. Heating under nitrogen atmospheres accelerated transition events by ∼100 °C when compared to heating in air. During heating, the interplanar gallery at first expanded in a series of steps starting at 90 °C as the CTA amphiphiles changed orientation, before collapsing rapidly at 240 °C, a temperature coinciding with the removal of about 40% of the organic material. Between 240 and 320 °C, the material consisted of fragments of the Keggin ion cores, arranged in 2D hexagonally-packed sheets. At ∼330 °C, the Keggin ions were completely destroyed and replaced by bulk WO which, upon further heating, transformed to bulk WO or WO depending on the environment.
通过将同多钨酸根阴离子与阳离子表面活性剂十六烷基三甲基溴化铵(CTA-Br)相结合,合成了一种混合表面活性剂/多金属氧酸盐化合物,得到了一种分级化合物,我们将其鉴定为(CTA)[HWO]Cl·2HO。在室温下,该化合物由六方有序排列的Keggin离子片组成,中间有一个包含有机阳离子烷基链的层间通道。合成过程高度依赖于溶液pH值、反应时间以及反应物的添加顺序。我们使用热重分析、差示扫描量热法、傅里叶变换红外光谱和原位同步辐射X射线衍射研究了温度对(CTA)[HWO]Cl·2HO稳定性的影响,发现通过一系列中间体逐步转化为单斜晶系的WO。与在空气中加热相比,在氮气气氛下加热使转变事件加速了约100℃。在加热过程中,随着CTA两亲分子改变取向,层间通道首先在90℃开始以一系列步骤膨胀,然后在240℃迅速塌陷,该温度与约40%的有机物质去除相吻合。在240℃至320℃之间,材料由Keggin离子核的碎片组成,排列成二维六方堆积的片层。在约330℃时,Keggin离子被完全破坏并被块状WO取代,进一步加热时,根据环境不同,块状WO会转化为块状WO或WO。