Yakabi Keiko, Mathieux Thibault, Milne Kirstie, López-Vidal Eva M, Buchard Antoine, Hammond Ceri
Cardiff Catalysis Institute, Cardiff University, Main Building, Park Place, Cardiff, CF10 3AT, UK.
Centre for Sustainable Chemical Technologies (CSCT), Department of Chemistry, University of Bath, Bath, BA2 7AY, UK.
ChemSusChem. 2017 Sep 22;10(18):3652-3659. doi: 10.1002/cssc.201701298. Epub 2017 Sep 7.
The Baeyer-Villiger oxidation is a key transformation for sustainable chemical synthesis, especially when H O and solid materials are employed as oxidant and catalyst, respectively. 4-substituted cycloketones, which are readily available from renewables, present excellent platforms for Baeyer-Villiger upgrading. Such substrates exhibit substantially higher levels of activity and produce lactones at higher levels of lactone selectivity at all values of substrate conversion, relative to non-substituted cyclohexanone. For 4-isopropyl cyclohexanone, which is readily available from β-pinene, continuous upgrading was evaluated in a plug-flow reactor. Excellent selectivity (85 % at 65 % conversion), stability, and productivity were observed over 56 h, with over 1000 turnovers (mol product per mol Sn) being achieved with no loss of activity. A maximum space-time yield that was almost twice that for non-substituted cyclohexanone was also obtained for this substrate [1173 vs. 607 g(product) kg(catalyst) cm h ]. The lactone produced is also shown to be of suitable quality for ring opening polymerization. In addition to demonstrating the viability of the Sn-β/H O system to produce renewable lactone monomers suitable for polymer applications, the substituted alkyl cyclohexanones studied also help to elucidate steric, electronic, and thermodynamic elements of this transformation in greater detail than previously achieved.
拜耳-维利格氧化反应是可持续化学合成中的关键转化反应,尤其是当分别使用过氧化氢和固体材料作为氧化剂和催化剂时。4-取代的环酮可容易地从可再生资源获得,是拜耳-维利格升级反应的优良平台。相对于未取代的环己酮,此类底物在所有底物转化率下均表现出显著更高的活性水平,并以更高的内酯选择性生成内酯。对于可容易地从β-蒎烯获得的4-异丙基环己酮,在活塞流反应器中评估了连续升级反应。在56小时内观察到了优异的选择性(转化率为65%时为85%)、稳定性和生产率,实现了超过1000次周转(每摩尔锡生成的产物摩尔数)且活性无损失。该底物还获得了几乎是非取代环己酮两倍的最大时空产率[1173对607 g(产物) kg(催化剂) cm h ]。所生成的内酯也显示出适合用于开环聚合反应的质量。除了证明Sn-β/过氧化氢体系生产适用于聚合物应用的可再生内酯单体的可行性外,所研究的取代烷基环己酮还有助于比以前更详细地阐明该转化反应的空间、电子和热力学因素。