Leiden Academic Centre for Drug Research, Faculty of Mathematics and Natural Sciences, Leiden University, Leiden, The Netherlands.
Nanoscale. 2017 Aug 24;9(33):12170-12177. doi: 10.1039/c7nr04220e.
Spatial confinement limits the conformational space accessible to biomolecules but the implications for bimolecular topology are not yet known. Folded linear biopolymers can be seen as molecular circuits formed by intramolecular contacts. The pairwise arrangement of intra-chain contacts can be categorized as parallel, series or cross, and has been identified as a topological property. Using molecular dynamics simulations, we determine the contact order distributions and topological circuits of short semi-flexible linear and ring polymer chains with a persistence length of l under a spherical confinement of radius R. At low values of l/R, the entropy of the linear chain leads to the formation of independent contacts along the chain and accordingly, increases the fraction of series topology with respect to other topologies. However, at high l/R, the fraction of cross and parallel topologies are enhanced in the chain topological circuits with cross becoming predominant. At an intermediate confining regime, we identify a critical value of l/R, at which all topological states have equal probability. Confinement thus equalizes the probability of more complex cross and parallel topologies to the level of the more simple, non-cooperative series topology. Moreover, our topology analysis reveals distinct behaviours for ring- and linear polymers under weak confinement; however, we find no difference between ring- and linear polymers under strong confinement. Under weak confinement, ring polymers adopt parallel and series topologies with equal likelihood, while linear polymers show a higher tendency for series arrangement. The radial distribution analysis of the topology reveals a non-uniform effect of confinement on the topology of polymer chains, thereby imposing more pronounced effects on the core region than on the confinement surface. Additionally, our results reveal that over a wide range of confining radii, loops arranged in parallel and cross topologies have nearly the same contact orders. Such degeneracy implies that the kinetics and transition rates between the topological states cannot be solely explained by contact order. We expect these findings to be of general importance in understanding chaperone assisted protein folding, chromosome architecture, and the evolution of molecular folds.
空间限制限制了生物分子可及的构象空间,但双分子拓扑结构的影响尚不清楚。折叠线性生物聚合物可以被看作是由分子内接触形成的分子电路。链内接触的成对排列可以分为平行、串联或交叉,并已被确定为拓扑性质。使用分子动力学模拟,我们确定了短半柔性线性和环聚合物链的接触顺序分布和拓扑电路,这些聚合物链的持久长度为 l,在半径为 R 的球形限制下。在 l/R 值较低的情况下,线性链的熵导致链上独立接触的形成,因此增加了与其他拓扑结构相比的串联拓扑结构的分数。然而,在高 l/R 时,链拓扑结构中的交叉和平行拓扑结构的分数增加,交叉结构占主导地位。在中间约束区域,我们确定了一个 l/R 的临界值,在该值下,所有拓扑状态的概率相等。因此,约束使更复杂的交叉和平行拓扑结构的概率与更简单的、非合作的串联拓扑结构的概率相等。此外,我们的拓扑分析揭示了弱约束下环形和线性聚合物的不同行为;然而,我们发现强约束下环形和线性聚合物没有区别。在弱约束下,环形聚合物以相等的可能性采用平行和串联拓扑,而线性聚合物则表现出更高的串联排列倾向。拓扑的径向分布分析揭示了约束对聚合物链拓扑的非均匀影响,从而对核心区域产生更明显的影响,而对约束表面的影响较小。此外,我们的结果表明,在较宽的约束半径范围内,平行和交叉拓扑排列的环具有几乎相同的接触顺序。这种简并性意味着拓扑状态之间的动力学和跃迁率不能仅通过接触顺序来解释。我们预计这些发现对于理解伴侣辅助蛋白折叠、染色体结构和分子折叠的进化具有普遍重要性。