Institute of Diagnostic and Interventional Radiology, University Hospital Zurich, University of Zurich, Zurich, Switzerland.
Institute of Diagnostic and Interventional Radiology, University Hospital Zurich, University of Zurich, Zurich, Switzerland; Department of Cardiology, University Heart Center, University Hospital Zurich, University of Zurich, Zurich, Switzerland; Institute for Biomedical Engineering, University and ETH Zurich, Zurich, Switzerland.
J Cardiovasc Comput Tomogr. 2017 Nov;11(6):437-443. doi: 10.1016/j.jcct.2017.09.003. Epub 2017 Sep 5.
The objective of this work was to support three-dimensional fusion of coronary CT angiography (coronary CTA) and CT myocardial perfusion (CT-Perf) data visualizing coronary artery stenoses and corresponding stress-induced myocardial perfusion deficits for diagnostics of coronary artery disease.
Twelve patients undergoing coronary CTA/CT-Perf after heart transplantation were included (56 ± 12 years, all males). CT image quality was rated. Coronary diameter stenoses >50% were documented for coronary CTA. Stress-induced perfusion deficits were noted for CT-Perf. A software was implemented facilitating 3D fusion imaging of coronary CTA/CT-Perf data. Coronary arteries and heart contours were segmented automatically. To overcome anatomical mismatch of coronary CTA/CT-Perf image acquisition, perfusion values were projected on the left ventricle as visualized in coronary CTA. Three resulting datasets (coronary tree/heart contour/perfusion values) were fused for combined three-dimensional rendering. 3D fusion was compared with conventional analysis of coronary CTA/CT-Perf data and to results from catheter coronary angiography.
CT image quality was rated good-excellent (3.5 ± 0.5, scale 1-4). 3D fusion imaging of coronary CTA/CT-Perf data was feasible in 11/12 patients (92%). One patient (8%) was excluded from further analysis due to severe motion artifacts. 2 of 11 remaining patients (18%) showed both stress-induced perfusion deficits and relevant coronary stenoses. Using 3D fusion imaging, the ischemic region could be correlated to a culprit coronary lesion in one case (1/2 = 50%) and diagnostic findings could be rectified in the other case (1/2 = 50%). Coronary CTA was in full correspondence with catheter coronary angiography.
A method for 3D fusion of coronary CTA/CT-Perf is introduced correlating relevant coronary lesions and corresponding stress-induced myocardial perfusion deficits.
本研究旨在支持冠状动脉 CT 血管造影(coronary CTA)和 CT 心肌灌注(CT-Perf)数据的三维融合,以可视化冠状动脉狭窄和相应的应激诱导的心肌灌注缺损,从而诊断冠状动脉疾病。
纳入 12 例行冠状动脉 CTA/CT-Perf 检查的心脏移植后患者(56±12 岁,均为男性)。评估 CT 图像质量。记录冠状动脉 CTA 上直径狭窄>50%的冠状动脉狭窄。CT-Perf 上注意到应激诱导的灌注缺损。实现了一种软件,以促进冠状动脉 CTA/CT-Perf 数据的三维融合成像。自动分割冠状动脉和心脏轮廓。为了克服冠状动脉 CTA/CT-Perf 图像采集的解剖不匹配,将灌注值投影到冠状动脉 CTA 中可视化的左心室上。将三个生成的数据集(冠状动脉树/心脏轮廓/灌注值)融合以进行联合三维渲染。将 3D 融合与冠状动脉 CTA/CT-Perf 数据的常规分析和导管冠状动脉造影的结果进行比较。
CT 图像质量评分为良好-优秀(3.5±0.5,1-4 级)。12 例患者中有 11 例(92%)可进行冠状动脉 CTA/CT-Perf 数据的 3D 融合成像。由于严重的运动伪影,1 例患者(8%)被排除在进一步分析之外。在 11 例剩余患者中,有 2 例(18%)患者既有应激诱导的灌注缺损又有相关的冠状动脉狭窄。在 1 例患者(1/2=50%)中,使用 3D 融合成像可以将缺血区域与罪魁祸首的冠状动脉病变相关联,在另 1 例患者(1/2=50%)中可以纠正诊断结果。冠状动脉 CTA 与导管冠状动脉造影完全相符。
本文介绍了一种冠状动脉 CTA/CT-Perf 的三维融合方法,该方法可关联相关的冠状动脉病变和相应的应激诱导的心肌灌注缺损。