Suppr超能文献

用于 X 射线和 CT 体模研究的液体组织替代物。

Liquid tissue surrogates for X-ray and CT phantom studies.

机构信息

Imaging, GE Global Research, 1 Research Circle, Niskayuna, NY, 12309, USA.

Department of Radiology and Biomedical Imaging, University of California, San Francisco, CA, 94143, USA.

出版信息

Med Phys. 2017 Dec;44(12):6251-6260. doi: 10.1002/mp.12617. Epub 2017 Oct 31.

Abstract

PURPOSE

To develop a simple method for producing liquid-tissue-surrogate (LTS) materials that accurately represent human soft tissues in terms of density and X-ray attenuation coefficient.

METHODS AND MATERIALS

We evaluated hypothetical mixtures of water, glycerol, butanol, methanol, sodium chloride, and potassium nitrate; these mixtures were intended to emulate human adipose, blood, brain, kidney, liver, muscle, pancreas, and skin. We compared the hypothetical densities, effective atomic numbers (Z ), and calculated discrete-energy CT attenuation [Hounsfield Units (HU)] of the proposed materials with those of human tissue elemental composition as specified in International Commission on Radiation Units (ICRU) Report 46. We then physically produced the proposed LTS materials for adipose, liver, and pancreas tissue, and we measured the polyenergetic CT attenuation (also expressed as HU) of these materials within a 32 cm phantom using a 64-slice clinical CT scanner at 80 kVp, 100 kVp, 120 kVp, and 140 kVp.

RESULTS

The predicted densities, Z , and calculated discrete-energy CT attenuation of our proposed formulations generally agreed with those of ICRU within < 1% or < 10 HU. For example, the densities of our hypothetical materials agreed precisely with ICRU's reported values and were 0.95 g/mL for adipose tissue, 1.04 g/mL for pancreatic tissue, and 1.06 g/mL for liver tissue; the discrete-energy CT attenuation at 60 keV of our hypothetical materials (and ICRU-specified compositions) were -107 HU (-113 HU) for adipose #3, -89 HU (-90 HU) for adipose #2, 56 HU (55 HU) for liver tissue, and 31 HU (31 HU) for pancreatic tissue. The densities of our physically produced materials (compared to ICRU-specified compositions) were 0.947 g/mL (0.0%) for adipose #2, 1.061 g/mL (+2.0%) for pancreatic tissue, and 1.074 g/mL (+1.3%) for liver tissue. The empirical polyenergetic CT attenuation measurements of our LTS materials (and the discrete-energy HU of the ICRU compositions at the mean energy of each spectrum) at 80 kVp were -104 HU (-113 HU) for adipose #3, -87 HU (-90 HU) for adipose #2, 59 HU (55 HU) for liver tissue, and 33 HU (31 HU) for pancreatic tissue; at 120 kVp, these were -83 HU (-83 HU) for adipose #3, -68 HU (-63 HU) for adipose #2, 55 HU (52 HU) for liver tissue, and 35 HU (33 HU) for pancreatic tissue.

CONCLUSION

Our method for formulating tissue surrogates allowed straightforward production of solutions with CT attenuation that closely matched the target tissues' expected CT attenuation values and trends with kVp. The LTSs' inexpensive and widely available constituent chemicals, combined with their liquid state, should enable rapid production and versatile use among different phantom and experiment types. Further study is warranted, such as the inclusion of contrast agents. These liquid tissue surrogates may potentially accelerate development and testing of advanced CT imaging techniques and technologies.

摘要

目的

开发一种简单的方法来制备液体组织模拟物(LTS)材料,使其在密度和 X 射线衰减系数方面准确地模拟人体软组织。

方法和材料

我们评估了水、甘油、丁醇、甲醇、氯化钠和硝酸钾的假设混合物;这些混合物旨在模拟人体脂肪、血液、大脑、肾脏、肝脏、肌肉、胰腺和皮肤。我们将提出的材料的假设密度、有效原子序数(Z)和计算离散能 CT 衰减[亨氏单位(HU)]与国际辐射单位委员会(ICRU)报告 46 中规定的人体组织元素组成进行了比较。然后,我们为脂肪、肝脏和胰腺组织物理生成了所提出的 LTS 材料,并使用 64 层临床 CT 扫描仪在 32cm 体模内在 80kVp、100kVp、120kVp 和 140kVp 下测量这些材料的多能 CT 衰减(也表示为 HU)。

结果

我们提出的配方的预测密度、Z 和计算离散能 CT 衰减通常与 ICRU 的<1%或<10 HU 一致。例如,我们假设材料的密度与 ICRU 报告的值完全一致,脂肪组织的密度为 0.95g/mL,胰腺组织的密度为 1.04g/mL,肝脏组织的密度为 1.06g/mL;我们假设材料的离散能 CT 衰减在 60keV 时(和 ICRU 指定的组成)为-107HU(-113HU)用于脂肪组织#3,-89HU(-90HU)用于脂肪组织#2,56HU(55HU)用于肝脏组织,31HU(31HU)用于胰腺组织。我们物理生成的材料的密度(与 ICRU 指定的组成相比)为 0.947g/mL(0.0%)用于脂肪组织#2,1.061g/mL(+2.0%)用于胰腺组织,1.074g/mL(+1.3%)用于肝脏组织。我们 LTS 材料的经验性多能 CT 衰减测量值(以及每个光谱平均能量处的 ICRU 成分的离散能 HU)在 80kVp 时为-104HU(-113HU)用于脂肪组织#3,-87HU(-90HU)用于脂肪组织#2,59HU(55HU)用于肝脏组织,33HU(31HU)用于胰腺组织;在 120kVp 时,这些值分别为-83HU(-83HU)用于脂肪组织#3,-68HU(-63HU)用于脂肪组织#2,55HU(52HU)用于肝脏组织,35HU(33HU)用于胰腺组织。

结论

我们制定组织替代品的方法允许直接制备 CT 衰减与目标组织预期 CT 衰减值相匹配的解决方案,并且与 kVp 呈趋势一致。LTS 便宜且广泛可用的组成化学物质,加上它们的液态,应能在不同的体模和实验类型之间快速生产和广泛使用。需要进一步研究,例如包括造影剂。这些液体组织模拟物可能有潜力加速先进 CT 成像技术和技术的开发和测试。

相似文献

本文引用的文献

1
Development of a universal medical X-ray imaging phantom prototype.通用医学X射线成像体模原型的开发。
J Appl Clin Med Phys. 2016 Nov 8;17(6):356-365. doi: 10.1120/jacmp.v17i6.6356.
6
Medical 3D Printing for the Radiologist.面向放射科医生的医学3D打印
Radiographics. 2015 Nov-Dec;35(7):1965-88. doi: 10.1148/rg.2015140320.
10
Nanoparticles for imaging: top or flop?用于成像的纳米颗粒:成功还是失败?
Radiology. 2014 Oct;273(1):10-28. doi: 10.1148/radiol.14131520.

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验