Graduate School of Convergence Science and Technology, Seoul National University, 145 Gwanggyo-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 443-270, Republic of Korea.
Nanoscale. 2017 Oct 19;9(40):15582-15590. doi: 10.1039/c7nr04657j.
Graphene nanocomposites have attracted much attention in many applications due to their superior properties. However, preparing graphene nanocomposites requires a time-consuming thermal treatment to reduce the graphene or synthesize nanomaterials, in most cases. We present an ultrafast synthesis of a carbon-coated silicon-graphene nanocomposite using a commercial microwave system. Electrochemically exfoliated graphene is used as a novel microwave susceptor to deliver efficient microwave energy conversion. Unlike graphene oxide, it does not require a time-consuming pre-thermal reduction or toxic chemical reduction to absorb microwave radiation efficiently. A carbon-coated silicon nanoparticle-electrochemically exfoliated graphene nanocomposite film was prepared by a few seconds' microwave irradiation. The sp domains of graphene absorb microwave radiation and generate heat to simultaneously reduce the graphene and carbonize the polydopamine carbon precursor. The as-prepared N-doped carbon-coated silicon-graphene film was used as a lithium-ion battery anode. The N-doped carbon coating decreases the contact resistance between silicon nanoparticles and graphene provides a wide range conductive network. Consequently, it exhibited a reversible capacity of 1744 mA h g at a current density of 0.1 A g and 662 mA h g at 1.0 A g after 200 cycles. This method can potentially be a general approach to prepare various graphene nanocomposites in an extremely short time.
石墨烯纳米复合材料由于其优异的性能,在许多应用中引起了广泛关注。然而,在大多数情况下,制备石墨烯纳米复合材料需要耗时的热处理来还原石墨烯或合成纳米材料。我们使用商业微波系统,提出了一种超快合成碳包覆硅-石墨烯纳米复合材料的方法。电化学剥离的石墨烯用作新型微波敏感器,以实现高效的微波能量转换。与氧化石墨烯不同,它不需要耗时的预热还原或有毒的化学还原来高效吸收微波辐射。通过几秒钟的微波辐照,制备了碳包覆硅纳米颗粒-电化学剥离石墨烯纳米复合材料薄膜。石墨烯的 sp 杂化域吸收微波辐射并产生热量,同时还原石墨烯并碳化聚多巴胺碳前体。所制备的 N 掺杂碳包覆硅-石墨烯薄膜用作锂离子电池的阳极。N 掺杂碳涂层降低了硅纳米颗粒和石墨烯之间的接触电阻,提供了广泛的导电网络。因此,在 0.1 A g 的电流密度下,其可逆容量为 1744 mA h g,在 1.0 A g 的电流密度下经过 200 次循环后,其可逆容量为 662 mA h g。这种方法有可能成为在极短时间内制备各种石墨烯纳米复合材料的通用方法。