Futagawa Koichi, Takasugi Yoshihiro, Kobayashi Takeharu, Morishita Satoshi, Okuda Takahiko
Department of Anesthesiology, Nara Hospital, Kindai University Faculty of Medicine, 1248-1 Otodacho, Ikoma, Nara, 630-0293, Japan.
Department of Anesthesiology, Kindai University Faculty of Medicine, 377-2 Ohno-higashi, Osaka-sayama, Osaka, 589-8511, Japan.
BMC Anesthesiol. 2017 Oct 17;17(1):141. doi: 10.1186/s12871-017-0432-1.
Small nasotracheal tubes (NTTs) and intranasal compression of the NTT in the nasal cavity may contribute to increasing airway resistance. Since the effects of size, shape, and partial compression of the NTT on airway resistance have not been investigated, values of airway resistance with partial compression of preformed NTTs of various sizes were determined.
To determine the factors affecting the respiratory pressure loss during the nasotracheal intubation, physical and fluid dynamics simulations were used. The internal minor axes of NTTs in the nasal cavity of intubated patients were measured using dial calipers. In physical and fluid dynamics simulations, pressure losses through the tubular parts, compressed parts, and slip joints of NTTs with internal diameters (IDs) of 6.0, 6.5, 7.0, 7.5, and 8.0 mm were estimated under partial compression.
The median internal minor axes of the 7.0- and 7.5-mm ID NTTs in the nasal cavity were 5.2 (4.3-5.6) mm and 6.0 (4.2-7.0) mm, respectively. With a volumetric air flow rate of 30 L/min, pressure losses through uncompressed NTTs with IDs of 6.0-, 6.5-, 7.0-, 7.5- and 8.0-mm were 651.6 ± 5.7 (6.64 ± 0.06), 453.4 ± 3.9 (4.62 ± 0.04), 336.5 ± 2.2 (3.43 ± 0.02), 225.2 ± 0.2 (2.30 ± 0.00), and 179.0 ± 1.1 Pa (1.82 ± 0.01 cmHO), respectively; the pressure losses through the slip joints were 220.3 (2.25), 131.1 (1.33), 86.8 (0.88), 57.1 (0.58), and 36.1 Pa (0.37 cmHO), respectively; and the pressure losses through the curvature of the NTT were 71.6 (0.73), 69.0 (0.70), 64.8 (0.66), 32.5 (0.33), and 41.6 Pa (0.42 cmHO), respectively. A maximum compression force of 34.1 N increased the pressure losses by 82.0 (0.84), 38.0 (0.39), 23.5 (0.24), 16.6 (0.17), and 9.3 Pa (0.09 cmHO), respectively.
Pressure losses through NTTs are in inverse proportion to the tubes' IDs; greater pressure losses due to slip joints, acute bending, and partial compression of the NTT were obvious in small NTTs. Pressure losses through NTTs, especially in small NTTs, could increase the work of breathing to a greater extent than that through standard tubes; intranasal compression further increases the pressure loss.
小号鼻气管导管(NTT)以及在鼻腔内对NTT进行鼻内压迫可能会导致气道阻力增加。由于NTT的尺寸、形状及部分压迫对气道阻力的影响尚未得到研究,因此我们测定了不同尺寸的预制NTT在部分压迫情况下的气道阻力值。
为了确定影响鼻气管插管过程中呼吸压力损失的因素,我们采用了物理和流体动力学模拟方法。使用游标卡尺测量了插管患者鼻腔内NTT的内部短轴。在物理和流体动力学模拟中,估计了内径(ID)分别为6.0、6.5、7.0、7.5和8.0 mm的NTT在部分压迫情况下通过管状部分、压缩部分和滑动接头的压力损失。
鼻腔内ID为7.0和7.5 mm的NTT的内部短轴中位数分别为5.2(4.3 - 5.6)mm和6.0(4.2 - 7.0)mm。当体积气流速率为30 L/min时,ID为6.0、6.5、7.0、7.5和8.0 mm的未压缩NTT的压力损失分别为651.6 ± 5.7(6.64 ± 0.06)、453.4 ± 3.9(4.62 ± 0.04)、336.5 ± 2.2(3.43 ± 0.02)、225.2 ± 0.2(2.30 ± 0.00)和179.0 ± 1.1 Pa(1.82 ± 0.01 cmH₂O);通过滑动接头的压力损失分别为220.3(2.25)、131.1(1.33)、86.8(0.88)、57.1(0.58)和36.1 Pa(0.37 cmH₂O);通过NTT弯曲部分的压力损失分别为71.6(0.73)、69.0(0.70)、64.8(0.66)、32.5(0.33)和41.6 Pa(0.42 cmH₂O)。最大压缩力34.1 N分别使压力损失增加了82.0(0.84)、38.0(0.39)、23.5(0.24)、16.6(0.17)和9.3 Pa(0.09 cmH₂O)。
通过NTT的压力损失与导管内径成反比;在小号NTT中,由于滑动接头、急剧弯曲和NTT的部分压迫导致的压力损失更为明显。通过NTT的压力损失,尤其是在小号NTT中,比通过标准导管的压力损失更能在更大程度上增加呼吸功;鼻内压迫会进一步增加压力损失。