Suppr超能文献

掺钕铌酸钙钡铁电晶体在1.06微米和1.34微米处的激光特性

Laser characteristics of Nd-doped calcium barium niobate ferroelectric crystal at 1.06 and 1.34  μm.

作者信息

Lan Jinglong, Huang Xiaoxu, Guan Xiaofeng, Xu Bin, Xu Huiying, Cai Zhiping, Xu Xiaodong, Li Dongzhen, Xu Jun

出版信息

Appl Opt. 2017 May 10;56(14):4191-4196. doi: 10.1364/AO.56.004191.

Abstract

We report on diode-pumped Nd-doped calcium barium niobate ferroelectric crystal (Nd:CBN-28) lasers at 1.06 and 1.34 μm. The maximum output power of the 1.06 μm laser reaches 0.69 W in the continuous-wave regime, which is believed to be the highest output power with Nd:CBN-28 crystal to date. Using a chopper to modulate the pump, the highest output power further improves to 0.77 W. Passively Q-switched laser operation at 1.06 μm, using a Cr:YAG saturable absorber, is realized with a maximum average output power of 89 mW, a pulse width of 220 ns, and a pulse energy 10.8 μJ. A quasi-continuous-wave laser at 1.34 μm with a chopper is also demonstrated with maximum output power of 56 mW. The scaled output power in the fundamental wave should be favorable for the investigation on broadband nonlinear self-frequency conversion into visible.

摘要

我们报道了二极管泵浦掺钕铌酸钙钡铁电晶体(Nd:CBN - 28)在1.06μm和1.34μm波长下的激光器。在连续波模式下,1.06μm激光器的最大输出功率达到0.69W,据信这是迄今为止Nd:CBN - 28晶体的最高输出功率。使用斩波器调制泵浦,最高输出功率进一步提高到0.77W。利用Cr:YAG饱和吸收体实现了1.06μm波长的被动调Q激光运转,最大平均输出功率为89mW,脉冲宽度为220ns,脉冲能量为10.8μJ。还展示了一台带有斩波器的1.34μm准连续波激光器,其最大输出功率为56mW。基波中的缩放输出功率应有利于对宽带非线性自频率转换为可见光的研究。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验