Gerdel Katharina, Spielmann Felix Maximilian, Hammerle Albin, Wohlfahrt Georg
Institut of Ecology, University of Innsbruck, Innsbruck, Austria.
Atmos Meas Tech. 2017 Sep 26;10(9):3525-3537. doi: 10.5194/amt-10-3525-2017.
The trace gas carbonyl sulphide (COS) has lately received growing interest in the eddy covariance (EC) community due to its potential to serve as an independent approach for constraining gross primary production and canopy stomatal conductance. Thanks to recent developments of fast-response high-precision trace gas analysers (e.g. quantum cascade laser absorption spectrometers (QCLAS)), a handful of EC COS flux measurements have been published since 2013. To date, however, a thorough methodological characterisation of QCLAS with regard to the requirements of the EC technique and the necessary processing steps has not been conducted. The objective of this study is to present a detailed characterization of the COS measurement with the Aerodyne QCLAS in the context of the EC technique, and to recommend best EC processing practices for those measurements. Data were collected from May to October 2015 at a temperate mountain grassland in Tyrol, Austria. Analysis of the Allan variance of high-frequency concentration measurements revealed sensor drift to occur under field conditions after an averaging time of around 50 s. We thus explored the use of two high-pass filtering approaches (linear detrending and recursive filtering) as opposed to block averaging and linear interpolation of regular background measurements for covariance computation. Experimental low-pass filtering correction factors were derived from a detailed cospectral analysis. The CO and HO flux measurements obtained with the QCLAS were compared against those obtained with a closed-path infrared gas analyser. Overall, our results suggest small, but systematic differences between the various high-pass filtering scenarios with regard to the fraction of data retained in the quality control and flux magnitudes. When COS and CO fluxes are combined in the so-called ecosystem relative uptake rate, systematic differences between the high-pass filtering scenarios largely cancel out, suggesting that this relative metric represents a robust key parameter comparable between studies relying on different post-processing schemes.
痕量气体羰基硫(COS)最近在涡度协方差(EC)领域受到越来越多的关注,因为它有可能作为一种独立方法来约束总初级生产力和冠层气孔导度。由于快速响应高精度痕量气体分析仪(例如量子级联激光吸收光谱仪(QCLAS))的最新发展,自2013年以来已发表了一些EC COS通量测量结果。然而,迄今为止,尚未针对EC技术的要求和必要的处理步骤对QCLAS进行全面的方法学表征。本研究的目的是在EC技术的背景下,详细介绍使用Aerodyne QCLAS进行COS测量的特征,并为这些测量推荐最佳的EC处理方法。数据于2015年5月至10月在奥地利蒂罗尔州的一个温带山地草原收集。对高频浓度测量的阿伦方差分析表明,在野外条件下,平均时间约50秒后会出现传感器漂移。因此,我们探索了使用两种高通滤波方法(线性去趋势和递归滤波),而不是对常规背景测量进行分组平均和线性插值来进行协方差计算。通过详细的互谱分析得出了实验性低通滤波校正因子。将用QCLAS获得的CO和HO通量测量结果与用闭路红外气体分析仪获得的结果进行了比较。总体而言,我们的结果表明,在各种高通滤波方案之间,在质量控制中保留的数据比例和通量大小方面存在微小但系统的差异。当在所谓的生态系统相对吸收率中结合COS和CO通量时,高通滤波方案之间的系统差异在很大程度上相互抵消,这表明这种相对指标代表了一个稳健的关键参数,在依赖不同后处理方案的研究之间具有可比性。