Suppr超能文献

通过负重锥形束计算机断层扫描测量胫骨结节-滑车沟偏移距离

Measurement of Tibial Tuberosity-Trochlear Groove Offset Distance by Weightbearing Cone-Beam Computed Tomography Scan.

作者信息

Marzo John M, Kluczynski Melissa A, Notino Anthony, Bisson Leslie J

机构信息

State University of New York at Buffalo, Buffalo, New York, USA.

出版信息

Orthop J Sports Med. 2017 Oct 19;5(10):2325967117734158. doi: 10.1177/2325967117734158. eCollection 2017 Oct.

Abstract

BACKGROUND

Computed tomography (CT) scans are useful for objectively measuring bone alignment because they show bone detail particularly well, and these scans have been used extensively to assess patellar orientation. The tibial tubercle-trochlear groove (TT-TG) offset distance has been shown to be influenced by knee flexion and weightbearing, yet conventional CT scans are obtained with the subject relaxed, supine, and with the knee in full extension. A new cone-beam CT scanner has been designed to allow for weightbearing images, potentially providing a more physiologically relevant assessment of patellofemoral alignment.

PURPOSE/HYPOTHESIS: The purpose of this study was to measure the TT-TG offset in healthy individuals without any history of knee complaints when CT scans were obtained while fully weightbearing on a flexed knee. Our hypothesis was that the TT-TG offset measurement in these healthy knees would be reproducible and less than the historically reported normal range.

STUDY DESIGN

Cross-sectional study; Level of evidence, 3.

METHODS

Twenty healthy volunteers without any history of knee complaint were recruited to undergo a weightbearing cone-beam CT scan of the knee flexed at 30°. The scans were reviewed by a radiologist and an orthopaedic surgeon, and TT-TG offset was measured using the digital tools of a picture archiving and communication system. Paired tests were used to compare TT-TG offset on 2 separate occasions for both raters. Inter- and intrarater reliability were assessed using a 2-way mixed-effects model intraclass correlation coefficient with corresponding 95% confidence intervals for TT-TG offset.

RESULTS

The mean TT-TG offset was 2.7 mm. There were no statistically significant differences in TT-TG offset between raters ( = .70; = .49) and time of read ( = .83; = .19). Good to moderate interrater reliability was found at the time of both reads, and good intrarater reliability was found for both raters.

CONCLUSION

When measured by CT scan and obtained from a subject while weightbearing on a flexed knee, the TT-TG offset is reproducible and the distance is less than that obtained via a conventional CT scan.

摘要

背景

计算机断层扫描(CT)对客观测量骨对线很有用,因为它能很好地显示骨骼细节,并且这些扫描已被广泛用于评估髌骨方向。胫骨结节-滑车沟(TT-TG)偏移距离已被证明受膝关节屈曲和负重的影响,然而传统CT扫描是在受试者放松、仰卧且膝关节完全伸展的状态下进行的。一种新的锥形束CT扫描仪已被设计用于获取负重图像,这可能为髌股关节对线提供更符合生理的评估。

目的/假设:本研究的目的是在膝关节屈曲且完全负重时进行CT扫描,测量无膝关节疾病史的健康个体的TT-TG偏移。我们的假设是,这些健康膝关节的TT-TG偏移测量结果将具有可重复性,且小于历史报道的正常范围。

研究设计

横断面研究;证据等级,3级。

方法

招募20名无膝关节疾病史的健康志愿者,对其屈曲30°的膝关节进行负重锥形束CT扫描。扫描结果由一名放射科医生和一名骨科医生进行评估,并使用图像存档与通信系统的数字工具测量TT-TG偏移。使用配对t检验比较两位评估者在两个不同时间点的TT-TG偏移。使用双向混合效应模型组内相关系数及相应的TT-TG偏移95%置信区间评估评估者间和评估者内的可靠性。

结果

TT-TG平均偏移为2.7mm。评估者之间(P = 0.70;95%CI = -0.49至1.80)以及读取时间之间(P = 0.83;95%CI = -0.54至1.60)的TT-TG偏移无统计学显著差异。两次读取时均发现评估者间可靠性良好至中等,且两位评估者的评估者内可靠性均良好。

结论

当通过CT扫描测量且受试者在膝关节屈曲负重时获取数据时,TT-TG偏移具有可重复性,且该距离小于通过传统CT扫描获得的距离。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/e14d/5652661/dda2a57534d9/10.1177_2325967117734158-fig1.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验