Influence of polyaluminum chloride on microbial characteristics in anaerobic membrane bioreactors for sludge digestion.

In this study, two parallel lab-scale anaerobic membrane bioreactors (AnMBRs), one of which was dosed with polyaluminum chloride (PAC) for membrane fouling control, were operated for treating excess activated sludge collected from a wastewater treatment plant (WWTP). The AnMBRs were inoculated with anaerobic digested sludge collected from an anaerobic digester of another WWTP. The microbial community of digested sludge and cake layer in AnMBRs, as well as that of excess sludge, was analyzed through polymerase chain reaction coupled with denaturing gradient gel electrophoresis (PCR-DGGE) and Illumina MiSeq. The dynamic variation of archaeal community in AnMBRs was not as obvious as that of bacterial community based on the PCR-DGGE results. Under the circumstance of stable operation, Cloacimonetes, Chloroflexi, Bacteroidetes, Proteobacteria, Firmicutes, and Ignavibacteriae were observed as the predominant phyla in digested sludge based on the Illumina results. In addition to that, the cake layer possessed similar predominant phyla with the digested sludge but owned a higher diversity. Furthermore, overlapping bacterial communities were discovered between the excess sludge and digested sludge. However, the abundance of aerobic bacteria was substantially reduced, while the abundance of anaerobic microorganisms like phylum Cloacimonetes and Smithella was enriched in digested sludge over time. Additional PAC dosing, on the one hand, affected the bioavailable substrate, thus further changing the microbial community structure; on the other hand, aluminum itself also affected specific microbial communities. Besides, PAC dosing indirectly influenced the bacterial diversity in AnMBR as well.