Sang Qingqing, Li Heyu, Williams Gareth, Wu Huanling, Zhu Li-Min
1 College of Chemistry, Chemical Engineering and Biotechnology, 121848 Donghua University , Shanghai, China.
2 UCL School of Pharmacy, University College London, London, UK.
J Biomater Appl. 2018 Mar;32(8):1105-1118. doi: 10.1177/0885328217749962. Epub 2018 Jan 2.
Dual-drug-loaded pH-responsive fiber scaffolds were successfully prepared by coaxial electrospinning. These were designed with the aim of being sutured into the resection site after tumor removal, to aid recovery and prevent cancer recurrence. The shell was made up of a mixture of gelatin and sodium bicarbonate (added to provide pH-sensitivity), and was loaded with the anti-inflammatory drug ciprofloxacin; the core comprised poly(lactide-co-ε-caprolactone) with the chemotherapeutic doxorubicin hydrochloride. Scanning electron microscopy revealed most fibers were smooth and homogeneous. Transmission electron microscopy demonstrated the presence of a clear core/shell structure. The fiber scaffolds were further characterized using infrared spectroscopy and X-ray diffraction, which proved that both drugs were present in the fibers in the amorphous form. The gelatin shells were cross-linked with glutaraldehyde to enhance their stability, and water contact angle measurements used to confirm they remained hydrophilic after this process, with angles between 10 and 35°. This is important for onward applications, since a hydrophilic surface is known to encourage cell proliferation. During in vitro drug release studies, a rapid and acid-responsive release of ciprofloxacin was seen, accompanied by sustained and long-term doxorubicin release. Both the release profiles and the mechanical strength of the fibers can effectively be tuned through the sodium bicarbonate content of the fibers: for instance, the break stress varies from 2.00 MPa to 2.57 MPa with an increase in sodium bicarbonate content. The pH values of aqueous media exposed to the scaffolds decrease only slightly, by less than 0.5 pH units, over the two-month timescale, suggesting that only minimal fiber degradation occurs during this time. The fiber scaffolds also have good biocompatibility, as revealed by in vitro cytotoxicity experiments. Overall, our results demonstrate that the novel scaffolds reported here are promising pH-sensitive drug delivery systems, and may be candidates for use after tumor resection surgery.
通过同轴静电纺丝成功制备了载有两种药物的pH响应性纤维支架。其设计目的是在肿瘤切除后缝合到切除部位,以帮助恢复并防止癌症复发。外壳由明胶和碳酸氢钠的混合物制成(添加碳酸氢钠以提供pH敏感性),并负载有抗炎药物环丙沙星;核心由含有化疗药物盐酸多柔比星的聚(丙交酯-共-ε-己内酯)组成。扫描电子显微镜显示大多数纤维光滑且均匀。透射电子显微镜证明存在清晰的核/壳结构。使用红外光谱和X射线衍射对纤维支架进行了进一步表征,结果证明两种药物均以无定形形式存在于纤维中。明胶外壳用戊二醛交联以增强其稳定性,并通过测量水接触角来确认在此过程后它们仍保持亲水性,接触角在10°至35°之间。这对于后续应用很重要,因为已知亲水性表面会促进细胞增殖。在体外药物释放研究中,观察到环丙沙星快速且对酸响应的释放,同时伴随着多柔比星的持续和长期释放。纤维的释放曲线和机械强度都可以通过纤维中碳酸氢钠的含量有效地进行调节:例如,随着碳酸氢钠含量的增加,断裂应力从2.00MPa变化到2.57MPa。在两个月的时间尺度上,暴露于支架的水性介质的pH值仅略有下降,下降幅度小于0.5个pH单位,这表明在此期间仅发生了极少的纤维降解。体外细胞毒性实验表明,纤维支架也具有良好的生物相容性。总体而言,我们的结果表明,本文报道的新型支架是很有前景的pH敏感药物递送系统,可能是肿瘤切除手术后的候选应用材料。