1Department of Neurosurgery, Stanford University, Stanford; and.
2Department of Neurosurgery, Kaiser Permanente, Redwood City, California.
J Neurosurg. 2019 Jan 1;130(1):67-75. doi: 10.3171/2017.7.JNS162267. Epub 2018 Jan 27.
OBJECTIVE Stereotactic laser ablation and neurostimulator placement represent an evolution in staged surgical intervention for epilepsy. As this practice evolves, optimal targeting will require standardized outcome measures that compare electrode lead or laser source with postprocedural changes in seizure frequency. The authors propose and present a novel stereotactic coordinate system based on mesial temporal anatomical landmarks to facilitate the planning and delineation of outcomes based on extent of ablation or region of stimulation within mesial temporal structures. METHODS The body of the hippocampus contains a natural axis, approximated by the interface of cornu ammonis area 4 and the dentate gyrus. The uncal recess of the lateral ventricle acts as a landmark to characterize the anterior-posterior extent of this axis. Several volumetric rotations are quantified for alignment with the mesial temporal coordinate system. First, the brain volume is rotated to align with standard anterior commissure-posterior commissure (AC-PC) space. Then, it is rotated through the axial and sagittal angles that the hippocampal axis makes with the AC-PC line. RESULTS Using this coordinate system, customized MATLAB software was developed to allow for intuitive standardization of targeting and interpretation. The angle between the AC-PC line and the hippocampal axis was found to be approximately 20°-30° when viewed sagittally and approximately 5°-10° when viewed axially. Implanted electrodes can then be identified from CT in this space, and laser tip position and burn geometry can be calculated based on the intraoperative and postoperative MRI. CONCLUSIONS With the advent of stereotactic surgery for mesial temporal targets, a mesial temporal stereotactic system is introduced that may facilitate operative planning, improve surgical outcomes, and standardize outcome assessment.
立体定向激光消融和神经刺激器放置代表了癫痫分阶段手术干预的发展。随着这种实践的发展,最佳靶向需要标准化的结果测量方法,将电极导联或激光源与术后癫痫发作频率的变化进行比较。作者提出并介绍了一种基于内侧颞叶解剖标志的新的立体定向坐标系,以促进基于消融范围或内侧颞叶结构刺激区域的规划和结果描绘。
海马体的主体包含一个自然轴,由角回区域 4 和齿状回的界面近似。侧脑室的 Uncal 隐窝用作标记,以描述该轴的前后范围。对几个体积旋转进行量化,以与内侧颞叶坐标系对齐。首先,大脑体积被旋转以与标准的前连合-后连合(AC-PC)空间对齐。然后,它通过与 AC-PC 线成角的轴向和矢状角进行旋转。
使用该坐标系,开发了定制的 MATLAB 软件,以允许直观地进行靶向和解释标准化。当从矢状面观察时,AC-PC 线与海马轴之间的角度约为 20°-30°,当从轴向观察时,角度约为 5°-10°。然后可以在这个空间中从 CT 识别植入的电极,并且可以根据术中及术后 MRI 计算激光尖端位置和烧伤几何形状。
随着立体定向手术治疗内侧颞叶靶区的出现,引入了一种内侧颞叶立体定向系统,该系统可能有助于手术规划,改善手术结果,并标准化结果评估。