Nakadate Hiromichi, Kurtoglu Evrim, Furukawa Hidenori, Oikawa Shoko, Aomura Shigeru, Kakuta Akira, Matsui Yasuhiro
Graduate School of System Design, Tokyo Metropolitan University.
Advanced Course of Mechanical and Computer Systems Engineering, National Institute of Technology, Tokyo College.
Stapp Car Crash J. 2017 Nov;61:53-65. doi: 10.4271/2017-22-0003.
This study aims to clarify the relation between axonal deformation and the onset of axonal injury. Firstly, to examine the influence of strain rate on the threshold for axonal injury, cultured neurons were subjected to 12 types of stretching (strains were 0.10, 0.15, and 0.20 and strain rates were 10, 30, 50, and 70 s). The formation of axonal swellings and bulbs increased significantly at strain rates of 50 and 30 s with strains of 0.15 and 0.20, respectively, even though those formations did not depend on strain rates in cultures exposed to a strain of 0.10. Then, to examine the influence of the strain along an axon on axonal injury, swellings were measured at every axonal angle in the stretching direction. The axons that were parallel to stretching direction were injured the most. Finally, we proposed an experimental model that subjected an axon to more accurate strain. This model observed the process of axonal injury formation by detecting the same neuron before and after stretching. These results suggest that the strain-rate dependency of axonal tolerance is induced by a higher magnitude of loading strain and an experiment focusing on axonal strain is required for obtaining more detailed injury criteria for an axon.
本研究旨在阐明轴突变形与轴突损伤发生之间的关系。首先,为了研究应变速率对轴突损伤阈值的影响,对培养的神经元进行了12种拉伸实验(应变分别为0.10、0.15和0.20,应变速率分别为10、30、50和70 s⁻¹)。在应变率为50 s⁻¹且应变值为0.15以及应变率为30 s⁻¹且应变值为0.20时,轴突肿胀和球状体的形成显著增加,尽管在应变值为0.10的培养物中,这些形成并不依赖于应变速率。然后,为了研究轴突上的应变对轴突损伤的影响,在拉伸方向的每个轴突角度测量肿胀情况。与拉伸方向平行的轴突损伤最严重。最后,我们提出了一个能使轴突承受更精确应变的实验模型。该模型通过在拉伸前后检测同一个神经元来观察轴突损伤形成的过程。这些结果表明,轴突耐受性对应变速率的依赖性是由更高强度的加载应变引起的,并且为了获得更详细的轴突损伤标准,需要进行关注轴突应变的实验。