Sangoi Maximiliano S, Todeschini Vítor, Steppe Martin
Faculty of Pharmacy, Federal University of Rio de Janeiro, 27930-560 Macaé-RJ, Brazil.
Faculty of Pharmacy, Federal University of Rio Grande do Sul, 90610-000 Porto Alegre-RS, Brazil.
J Pharm Anal. 2015 Apr;5(2):137-141. doi: 10.1016/j.jpha.2014.10.001. Epub 2014 Oct 23.
A dissolution test for fesoterodine low dose extended-release tablets using liquid chromatographic (LC) method equipped with a C monolithic column was developed and validated. LC system was operated isocratically at controlled temperature (40 °C) using a mobile phase of acetonitrile:methanol:0.03 M ammonium acetate (pH 3.8) (30:15:55, v/v/v), run at a flow rate of 1.5 mL/min and detected at 208 nm. The best dissolution conditions for this formulation were achieved using a USP apparatus 2 (paddle) at 100 rpm and 900 mL of phosphate buffer at pH 6.8 as the dissolution medium. Validation parameters such as the specificity, linearity, accuracy, precision, and robustness were evaluated according to international guidelines, giving results within the acceptable range. The kinetic parameters of drug release were also investigated using model-dependent methods and the dissolution profiles were best described by the Higuchi model. The validated dissolution test can be applied for quality control of this formulation.
采用配备C整体柱的液相色谱(LC)法开发并验证了非索罗定低剂量缓释片的溶出度试验。LC系统在控温(40℃)下等度运行,使用乙腈:甲醇:0.03M醋酸铵(pH 3.8)(30:15:55,v/v/v)的流动相,流速为1.5 mL/min,检测波长为208 nm。该制剂的最佳溶出条件是使用美国药典装置2(桨板),转速为100 rpm,以900 mL pH 6.8的磷酸盐缓冲液作为溶出介质。根据国际指南评估了特异性、线性、准确性、精密度和稳健性等验证参数,结果在可接受范围内。还使用模型依赖方法研究了药物释放的动力学参数,溶出曲线最好用Higuchi模型描述。经过验证的溶出度试验可用于该制剂的质量控制。