Hartzler Molly A, Abdel Matthew P, Sculco Peter K, Taunton Michael J, Pagnano Mark W, Hanssen Arlen D
Department of Orthopedic Surgery, Mayo Clinic, Rochester, MN, USA.
Clin Orthop Relat Res. 2018 Feb;476(2):293-301. doi: 10.1007/s11999.0000000000000035.
Dislocation is one of the most common complications after revision THA. Dual-mobility constructs and large femoral heads (ie, 40 mm) are two contemporary, nonconstrained bearing options used in revision THA to minimize the risk of dislocation; however, it is not currently established if there is a clear benefit to using dual-mobility constructs over large femoral heads in the revision setting.
QUESTIONS/PURPOSES: We sought to determine if dual-mobility constructs would provide a reduction in dislocation, rerevision for dislocation, and reoperation or other complications as compared with large femoral heads in revision THA.
From 2011 to 2014, a series of 355 THAs underwent revision for any reason and received either a dual-mobility construct (146 THAs) or a 40-mm large femoral head (209 THAs). Indications for either construct were based on surgeon judgment; however, there is a preference to use dual-mobility constructs in patients believed to be at higher risk of dislocation. In the dual-mobility group, 20 of 146 (14%) were excluded because of loss of followup before 2 years or because they had a dual-mobility shell cemented into a preexisting acetabular component. In the large head group, 33 of 209 (16%) were lost to followup before 2 years. Followup in the dual-mobility group was 3.3 ± 0.8 years and followup in the large head group was 3.9 ± 0.9 years. Primary endpoints included dislocation, rerevisions for dislocation, and reoperations, which were determined through our institution's total joint registry and verified by individual patient chart review. Age and body mass index were not different with the numbers available between the groups, but there was a slight predominance of females in the dual-mobility group (52% [66 of 126] female) versus the 40-mm large head group (41% [72 of 176] female) (p = 0.05). Notably, 33% (41 of 126) of patients receiving the dual-mobility constructs had the index revision THA done for a diagnosis of recurrent dislocation versus 9% (17 of 176) in the 40-mm large head group. Mean effective head size in the dual-mobility group was 47 mm (range, 38-58 mm).
The subsequent frequency of dislocation in the dual-mobility construct group was less (3% [four of 126] dual-mobility versus 10% [17 of 176] in the 40-mm large head group; hazard ratio, 3.2 [1.1-9.4]; p = 0.03). Rerevision for dislocation in the dual-mobility construct group was less frequent (1% [one of 126] dual-mobility versus 6% [10 of 176] in the 40-mm large head group; hazard ratio, 7.1 [0.9-55.6]; p = 0.03). Reoperation for any cause in the dual-mobility construct group was less frequent (6% [eight of 126] dual-mobility versus 15% [27 of 176] in the 40-mm large head group; hazard ratio, 2.5 [1.1-5.5]; p = 0.02); there were no differences between the groups in terms of the overall percentage of complications in each group.
When compared with patients treated with a 40-mm large femoral head, patients undergoing revision THA who received a dual-mobility construct had a lower risk of subsequent dislocation, rerevision for dislocation, and reoperation for any reason in the first several years postoperatively. Those findings were present despite selection bias in this study to use the dual-mobility construct in patients at the highest risk for subsequent dislocation. Given the lower risk of subsequent dislocation, rerevision, and reoperation with the dual-mobility construct, some surgeons may wish to consider whether the role of dual-mobility should be judiciously expanded in contemporary revision THA.
Level III, therapeutic study.
脱位是翻修全髋关节置换术(THA)后最常见的并发症之一。双动结构和大尺寸股骨头(即40mm)是当代翻修THA中使用的两种非限制性承重选择,以尽量降低脱位风险;然而,目前尚不清楚在翻修情况下使用双动结构相对于大尺寸股骨头是否有明显益处。
问题/目的:我们试图确定与翻修THA中的大尺寸股骨头相比,双动结构是否能减少脱位、因脱位进行的再次翻修以及再次手术或其他并发症。
2011年至2014年,一系列355例因任何原因接受翻修的THA患者,接受了双动结构(146例THA)或40mm大尺寸股骨头(209例THA)。两种结构的适应证均基于外科医生的判断;然而,对于认为脱位风险较高的患者,更倾向于使用双动结构。在双动结构组中,146例中有20例(14%)因2年之前失访或因将双动髋臼杯固定于原有的髋臼部件中而被排除。在大尺寸股骨头组中,209例中有33例(16%)在2年之前失访。双动结构组的随访时间为3.3±0.8年,大尺寸股骨头组的随访时间为3.9±0.9年。主要终点包括脱位、因脱位进行的再次翻修以及再次手术,这些通过我们机构的全关节登记系统确定,并经个体患者病历审查核实。两组间可用数据中的年龄和体重指数无差异,但双动结构组女性略占优势(52%[126例中的66例]为女性),而40mm大尺寸股骨头组为41%[176例中的72例]为女性(p=0.05)。值得注意的是,接受双动结构的患者中33%(共126例中的41例)初次翻修THA的诊断为复发性脱位,而40mm大尺寸股骨头组为9%(共176例中的17例)。双动结构组的平均有效股骨头尺寸为47mm(范围38-58mm)。
双动结构组随后的脱位发生率较低(3%[126例中的4例]为双动结构,而40mm大尺寸股骨头组为10%[176例中的17例];风险比为3.2[1.1-9.4];p=0.03)。双动结构组因脱位进行的再次翻修频率较低(1%[126例中的1例]为双动结构,而40mm大尺寸股骨头组为6%[176例中的10例];风险比为7.1[0.9-55.6];p=0.03)。双动结构组因任何原因进行的再次手术频率较低(6%[126例中的8例]为双动结构,而40mm大尺寸股骨头组为15%[176例中的27例];风险比为2.5[1.1-5.5];p=0.02);两组间每组并发症的总体百分比无差异。
与接受40mm大尺寸股骨头治疗的患者相比,接受双动结构的翻修THA患者在术后最初几年发生后续脱位、因脱位进行再次翻修以及因任何原因进行再次手术的风险较低。尽管本研究存在选择偏倚,即对后续脱位风险最高的患者使用双动结构,但仍有这些发现。鉴于双动结构后续脱位、再次翻修和再次手术的风险较低,一些外科医生可能希望考虑双动结构在当代翻修THA中的作用是否应谨慎扩大。
III级,治疗性研究。