Suppr超能文献

卡西悬浮液滴用于无失真的低能量固-液相互作用。

Cassie-Levitated Droplets for Distortion-Free Low-Energy Solid-Liquid Interactions.

机构信息

Nanotechnology Research Laboratory, Research School of Engineering , The Australian National University , Canberra , ACT 2601 , Australia.

出版信息

ACS Appl Mater Interfaces. 2018 Apr 25;10(16):13999-14007. doi: 10.1021/acsami.8b00641. Epub 2018 Apr 11.

Abstract

Despite the rapid advent of superomniphobic materials, there is a lack of methodologies to accurately investigate the ultralow-energy interactions taking place on these interfaces. For instance, universally employed models such as the pendant droplet often fail to provide representative information on the wetting properties of superomniphobic surfaces. The delicate balance between the forces acting at the droplet-surface and droplet-needle interfaces can easily result in heavily distorted droplet profiles. Here, we introduce a Cassie-levitating droplet model which overcomes the limitations of the pendant droplet model, allowing a distortion-free assessment of the interactions between super(amphi)omniphobic materials and low surface tension liquids. Comparative analysis in wetting of low surface tension fluids such as hexadecane (∼27.47 mN/m) on superamphiphobic surfaces via the Cassie-levitating and pendant droplet models reveals up to 70° (800%) deviations in the estimated contact angle hysteresis. A theoretical framework is developed to assess experimentally observed profile distortions against ideal gravity-induced sagging of droplet shapes during dynamic droplet expansion and contraction cycles. Notably, pendant droplets resulted in up to 50% distortion while the Cassie-levitating ones achieved less than just 10%. We believe that the Cassie-levitating droplet model bears ample potential for the characterization of the rapidly emerging family of superomniphobic materials, setting the basis for their future engineering in numerous emerging applications.

摘要

尽管超疏油材料迅速出现,但缺乏准确研究这些界面上超低能量相互作用的方法。例如,普遍采用的模型(如悬滴)往往无法提供有关超疏油表面润湿性的代表性信息。作用于液滴-表面和液滴-针界面的力之间的微妙平衡很容易导致液滴轮廓严重变形。在这里,我们引入了 Cassie 悬浮液滴模型,该模型克服了悬滴模型的局限性,允许对超(两亲)疏油材料与低表面张力液体之间的相互作用进行无失真评估。通过 Cassie 悬浮和悬滴模型对低表面张力流体(如十六烷,约 27.47 mN/m)在超疏油表面上的润湿性进行比较分析,发现估计的接触角滞后值偏差高达 70°(800%)。我们开发了一个理论框架,用于评估实验观察到的轮廓变形与动态液滴膨胀和收缩循环期间液滴形状因重力引起的理想下垂之间的关系。值得注意的是,悬滴导致高达 50%的变形,而 Cassie 悬浮液滴的变形不到 10%。我们相信 Cassie 悬浮液滴模型具有充分的潜力来表征迅速出现的超疏油材料家族,为它们在众多新兴应用中的未来工程应用奠定了基础。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验