1 Department of Vascular Surgery, St Antonius Hospital, Nieuwegein, the Netherlands.
2 Technical Medicine, Faculty of Science and Technology, University of Twente, Enschede, the Netherlands.
J Endovasc Ther. 2018 Jun;25(3):358-365. doi: 10.1177/1526602818764413. Epub 2018 Apr 6.
To validate a novel methodology employing regular postoperative computed tomography angiography (CTA) scans to assess essential factors contributing to durable endovascular aneurysm repair (EVAR), including endograft deployment accuracy, neck adaptation to radial forces, and effective apposition of the fabric within the aortic neck.
Semiautomatic calculation of the apposition surface between the endograft and the infrarenal aortic neck was validated in vitro by comparing the calculated surfaces over a cylindrical silicon model with known dimensions on CTA reconstructions with various slice thicknesses. Interobserver variabilities were assessed for calculating endograft position, apposition, and expansion in a retrospective series of 24 elective EVAR patients using the repeatability coefficient (RC) and the intraclass correlation coefficient (ICC). The variability of these calculations was compared with variability of neck length and diameter measurements on centerline reconstructions of the preoperative and first postoperative CTA scans.
In vitro validation showed accurate calculation of apposition, with deviation of 2.8% from the true surface for scans with 1-mm slice thickness. Excellent agreement was achieved for calculation of the endograft dimensions (ICC 0.909 to 0.996). Variability was low for calculation of endograft diameter (RC 2.3 mm), fabric distances (RC 5.2 to 5.7 mm), and shortest apposition length (RC 4.1 mm), which was the same as variability of regular neck diameter (RC 0.9 to 1.1 mm) and length (RC 4.0 to 8.0 mm) measurements.
This retrospective validation study showed that apposition surfaces between an endograft and the infrarenal neck can be calculated accurately and with low variability. Determination of the (ap)position of the endograft in the aortic neck and detection of subtle changes during follow-up are crucial to determining eventual failure after EVAR.
验证一种新的方法,该方法使用常规术后计算机断层血管造影(CTA)扫描来评估有助于持久血管内动脉瘤修复(EVAR)的基本因素,包括移植物的放置准确性、颈部对径向力的适应以及织物在主动脉颈部内的有效贴合。
通过将不同层厚的 CTA 重建的计算表面与具有已知尺寸的圆柱硅模型上的已知表面进行比较,对移植物和肾下主动脉颈部之间的贴合表面进行了体外半自动计算。在 24 例选择性 EVAR 患者的回顾性系列中,使用重复性系数(RC)和组内相关系数(ICC)评估了计算移植物位置、贴合和扩张的观察者间变异性。将这些计算的变异性与术前和术后第一次 CTA 扫描的中心线重建的颈部长度和直径测量的变异性进行了比较。
体外验证表明,在 1mm 层厚的扫描中,贴合的计算结果准确,与真实表面的偏差为 2.8%。对于移植物尺寸的计算,达到了极好的一致性(ICC 0.909 至 0.996)。移植物直径(RC 2.3mm)、织物距离(RC 5.2 至 5.7mm)和最短贴合长度(RC 4.1mm)的计算变异性较低,与常规颈部直径(RC 0.9 至 1.1mm)和长度(RC 4.0 至 8.0mm)测量的变异性相同。
这项回顾性验证研究表明,移植物和肾下颈部之间的贴合表面可以准确且具有较低的变异性进行计算。在主动脉颈部中确定移植物的(ap)位置以及在随访过程中检测细微变化对于确定 EVAR 后的最终失败至关重要。