Esopi Monica R, Zheng Erjin, Zhang Xiaoyu, Cai Chen, Yu Qiuming
Department of Chemical Engineering, University of Washington, Seattle, WA 98195, USA.
Phys Chem Chem Phys. 2018 Apr 25;20(16):11273-11284. doi: 10.1039/c8cp00361k.
Organic-inorganic hybrid ultraviolet photodetectors with tunable spectral response are desirable for many different applications. In this work, we blended poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine] (PTAA) with ZnO nanoparticles in weight ratios of 1 : 1 and 2 : 1 to create charge traps within the active layers for devices with the conventional structure ITO/PEDOT : PSS/PTAA : ZnO/BCP/Al. Thin (150-200 nm) and thick (1400-1900 nm) active layers were employed to utilize charge collection narrowing (CCN). Both thickness and composition of the active layer impacted the spectral tunability of the photoresponse. A single narrow response peak centered at 420 nm (the PTAA absorption edge) with a full width at half maximum of 12 nm was achieved from the device with a 1900 nm active layer and PTAA : ZnO weight ratio of 1 : 1. Decreasing the active layer thickness to 150 nm resulted in a broad spectral response between 320-420 nm with an external quantum efficiency (EQE) value of 295% under 350 nm illumination and a -1 V bias, exhibiting photomultiplication via charge trapping and injection even at small reverse biases. Increasing the weight ratio of PTAA : ZnO to 2 : 1 lowered both the dark current and photocurrent, eliminated photomultiplication in the thin device, and diminished the efficacy of CCN to narrow the spectral photoresponse in the thick device. Transfer matrix method (TMM) and 3-dimensional finite-difference time-domain (3D-FDTD) simulations were performed to understand the impact of thickness and composition of the active layer on the spectral response of UV photodetectors in terms of exciton generation rate and electric field distribution within the devices.
具有可调谐光谱响应的有机-无机杂化紫外光电探测器在许多不同应用中都很受欢迎。在这项工作中,我们将聚双(4-苯基)(2,4,6-三甲基苯基)胺与ZnO纳米颗粒按1:1和2:1的重量比混合,在具有传统结构ITO/PEDOT:PSS/PTAA:ZnO/BCP/Al的器件的有源层内创建电荷陷阱。采用薄(150-200nm)和厚(1400-1900nm)有源层来利用电荷收集变窄(CCN)。有源层的厚度和组成都影响了光响应的光谱可调谐性。对于有源层为1900nm且PTAA:ZnO重量比为1:1的器件,实现了一个以420nm(PTAA吸收边缘)为中心的单窄响应峰,半高宽为12nm。将有源层厚度减小到150nm会导致在320-至420nm之间产生宽光谱响应,在350nm光照和-1V偏压下外部量子效率(EQE)值为295%,即使在小反向偏压下也通过电荷俘获和注入表现出光倍增。将PTAA:ZnO的重量比增加到2:1会降低暗电流和光电流,消除薄器件中的光倍增,并降低CCN在厚器件中使光谱光响应变窄的效果。进行了转移矩阵法(TMM)和三维时域有限差分(3D-FDTD)模拟,以从激子产生率和器件内电场分布的角度了解有源层厚度和组成对紫外光电探测器光谱响应的影响。