Suppr超能文献

[钩骨骨内血管解剖结构的三维架构:一项微计算机断层扫描研究]

[Three-dimensional architecture of intraosseous vascular anatomy of the hamate: a micro-computed tomography study].

作者信息

Wang D Y, Li X, Shen Z C, Gu P L, Pei Y R, Zeng G, Leng H J, Zhang W G

机构信息

Department of Human Anatomy & Histology and Embryology, Peking University School of Basic Medical Sciences, Beijing 100191, China.

School of Electronics Engineering and Computer Science, Peking University, Beijing 100871, China.

出版信息

Beijing Da Xue Xue Bao Yi Xue Ban. 2018 Apr 18;50(2):245-248.

Abstract

OBJECTIVE

To obtain three-dimensional intraosseous artery of the hamate and to provide the vascular anatomy basis of hamate fracture fixation.

METHODS

PbO (lead monoxide, Sinopharm Chemical Reagent Beijing Co. Ltd) was ground into particles less than 40 μm and suspended in turpentine oil (Chemical Reagent Beijing Co. Ltd) at ratios of 1 g : 1.5 mL, 1 g : 1 mL and 1 g : 0.5 mL. Three specimens were investigated. Brachial arteries were cannulated and perfused with lead-based contrast agent. Hamates were harvested and scanned using micro-computed tomography (microCT). The acquisition protocols were as follows: CT scan setup: total rotation [Degrees], 360; rotation steps, 360; X-ray detector setup: transaxial, 2048; axial, 2048; exposure time, 1 500 ms, Binning, 1; system magnification: high-med. X-ray tube setup: 80 kV, 500 mA current. The down-sampling factor used in the reconstruction was 2. The effective voxel size of the final image was 27.30 μm. The three-dimensional model of the hamate was generated and the distribution and pattern of vessels were evaluated.

RESULTS

There were abundant extraosseous vessels around the hamate. They were mainly running in the tendons and ligaments around the hamate. Four vascular zones were identified on the hamate surface. They were on the palmar platform of the hamate body, on the dorsal side, on the ulnar side and on the tip of hamulus, namely. There were anastomoses among 4 vascular zones. We did not observe any vessels penetrating through the articular cartilage. The extraosseous vessels of the vascular zones gave a number of intraosseous branches into the hamate. The hamate body received intraosseous blood supply from the dorsal, palmar and ulnar while the hamulus from the palmar, ulnar and hamulus tip. There were some intraosseous branches anastomosing with each other.

CONCLUSION

The extraosseous and intraosseous vessels of the hamate were more than what used to be considered. The hamate body and hamulus received blood supply from multiple directions and arteries anastomosed extensively both outside and inside the hamate, making it possible that the intraosseous perfusion survived after fracture. It is likely that the nonunion after the hamate fracture is not caused by the vascular damage but the malalignment of the fragments.

摘要

目的

获取钩骨的三维骨内动脉,为钩骨骨折固定提供血管解剖学依据。

方法

将氧化铅(国药集团化学试剂北京有限公司)研磨成小于40μm的颗粒,并分别按1g∶1.5mL、1g∶1mL和1g∶0.5mL的比例悬浮于松节油(北京化学试剂有限公司)中。对3个标本进行研究。将肱动脉插管并用铅基造影剂灌注。取出钩骨并使用微型计算机断层扫描(microCT)进行扫描。采集方案如下:CT扫描设置:总旋转角度[度],360;旋转步数,360;X射线探测器设置:横断面,2048;纵断面,2048;曝光时间,1500ms,合并,1;系统放大倍数:高中档。X射线管设置:80kV,500mA电流。重建时使用的下采样因子为2。最终图像的有效体素大小为27.30μm。生成钩骨的三维模型并评估血管的分布和形态。

结果

钩骨周围有丰富的骨外血管。它们主要走行于钩骨周围的肌腱和韧带中。在钩骨表面确定了4个血管区。分别位于钩骨体的掌侧平台、背侧、尺侧和钩突尖端。4个血管区之间存在吻合。未观察到有血管穿透关节软骨。血管区的骨外血管发出许多骨内分支进入钩骨。钩骨体接受来自背侧、掌侧和尺侧的骨内血液供应,而钩突接受来自掌侧、尺侧和钩突尖端的血液供应。有一些骨内分支相互吻合。

结论

钩骨的骨外和骨内血管比以往认为的要多。钩骨体和钩突接受来自多个方向的血液供应,动脉在钩骨内外广泛吻合,使得骨折后骨内灌注得以存活成为可能。钩骨骨折后不愈合很可能不是由血管损伤引起的,而是由骨折块的排列不齐导致的。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验