Garcia Carlos, Ruales-Carrera Edwin, Prates Luiz-Henrique-Maykot, Volpato Claudia-Angela-Maziero
DDS, MSc, Department of Dentistry, Federal University of Santa Catarina (UFSC), Florianópolis, SC, Brazil.
DDS, MSc, PhD Student, Center for Education and Research on Dental Implants (CEPID), Department of Dentistry, Federal University of Santa Catarina (UFSC), Florianópolis, SC, Brazil.
J Clin Exp Dent. 2018 Feb 1;10(2):e139-e145. doi: 10.4317/jced.54459. eCollection 2018 Feb.
Different disinfectant solutions or medications are indicated prior fiber post bonding procedures.The aim was to evaluate the effect of different pretreatments of root canal on the bond strength of a fiber post luted to dentin with self-adhesive resin cement.
Forty-eight single-rooted mandibular premolars were endodontically treated and prepared to receive fiber posts. Teeth were assigned to four groups (n=12). Root canal walls were subjected to no pretreatment (G1 - control); irrigation with 10 mL of 5% sodium hypochlorite (NaOCl) (G2); 10 mL of 17% ethylenediaminetetraacetic acid (EDTA) associated with 10 mL of 5% NaOCl (G3); or 10 mL of 17% EDTA (G4). Fiber posts were bonded with self-adhesive cement. After the roots were sectioned into slices, a push-out bond strength test was performed using a universal testing machine at crosshead speed of 0.5 mm/min. Bond strength data were recorded and expressed in MPa and analyzed by Anova (5%) and Tukey Test (5%).
It was found that G2 (9.36 MPa) and G4 (6.33 MPa) were significantly different among themselves and statistically inferior to G1 (13.93 MPa) while G3 (14.31 MPa) was statistically similar to G1 (control) and superior to G2 and G4.
Irrigation with 17% EDTA associated with 5% NaOCl showed increased bond strength compared with the same solutions used alone. Self-adhesive, Dentin, Push-out, Bonding.
在纤维桩粘结程序之前需要使用不同的消毒溶液或药物。本研究旨在评估根管不同预处理对用自粘结树脂水门汀粘结至牙本质的纤维桩粘结强度的影响。
选取48颗单根下颌前磨牙进行根管治疗并预备以植入纤维桩。将牙齿分为四组(n = 12)。根管壁不进行预处理(G1组 - 对照组);用10 mL 5%次氯酸钠(NaOCl)冲洗(G2组);10 mL 17%乙二胺四乙酸(EDTA)联合10 mL 5% NaOCl冲洗(G3组);或用10 mL 17% EDTA冲洗(G4组)。纤维桩用自粘结水门汀粘结。牙根切成薄片后,使用万能试验机以0.5 mm/min的十字头速度进行推出粘结强度测试。记录粘结强度数据并以MPa表示,采用方差分析(5%)和Tukey检验(5%)进行分析。
发现G2组(9.36 MPa)和G4组(6.33 MPa)之间存在显著差异,且在统计学上低于G1组(13.93 MPa),而G3组(14.31 MPa)在统计学上与G1组(对照组)相似,且优于G2组和G4组。
与单独使用相同溶液相比,17% EDTA联合5% NaOCl冲洗显示出更高的粘结强度。自粘结、牙本质、推出、粘结