The influence of cerebrospinal fluid on blood coagulation and the implications for ventriculovenous shunting.

OBJECTIVE

The effect of CSF on blood coagulation is not known. Enhanced coagulation by CSF may be an issue in thrombotic complications of ventriculoatrial and ventriculosinus shunts. This study aimed to assess the effect of CSF on coagulation and its potential effect on thrombotic events affecting ventriculovenous shunts.

METHODS

Two complementary experiments were performed. In a static experiment, the effect on coagulation of different CSF mixtures was evaluated using a viscoelastic coagulation monitor. A dynamic experiment confirmed the amount of clot formation on the shunt surface in a roller pump model.

RESULTS

CSF concentrations of 9% and higher significantly decreased the activated clotting time (ACT; 164.9 seconds at 0% CSF, 155.6 seconds at 9% CSF, and 145.1 seconds at 32% CSF). Increased clot rates (CRs) were observed starting at a concentration of 5% (29.3 U/min at 0% CSF, 31.6 U/min at 5% CSF, and 35.3 U/min at 32% CSF). The roller pump model showed a significantly greater percentage of shunt surface covered with deposits when the shunts were infused with CSF rather than Ringer's lactate solution (90% vs 63%). The amount of clot formation at the side facing the blood flow (impact side) tended to be lower than that at the side facing away from the blood flow (wake side; 71% vs 86%).

CONCLUSIONS

Addition of CSF to blood accelerates coagulation. The CSF-blood-foreign material interaction promotes clot formation, which might result in thrombotic shunt complications. Further development of the ventriculovenous shunt technique should focus on preventing CSF-blood-foreign material interaction and stagnation of CSF in wake zones.