Université Paris Diderot, Sorbonne Paris Cité, CNRS, Laboratoire Matériaux et Phénomènes Quantiques, UMR 7162, 75013, Paris, France.
Phys Chem Chem Phys. 2018 May 9;20(18):13030-13037. doi: 10.1039/c8cp00737c.
Many physical properties of nanoparticles (NPs) are driven by their equilibrium shape (ES). Thus, knowing the kinetic and thermodynamic parameters that affect the particle morphology is key for the rational design of NPs with targeted properties. Here, we report on the thermodynamic ES of supported monometallic palladium and bimetallic palladium-gold (Pd-Au) single-crystalline truncated nano-octahedra (TOs) studied using aberration-corrected transmission electron microscopy (TEM). Monometallic palladium and bimetallic Pd62Au38 and Pd43Au57 TOs were grown by pulsed laser deposition on rutile titania (r-TiO2) nanorods exposing mainly (110) facets. Particle structure and dimension were first obtained from aberration-corrected high resolution TEM (HRTEM) images acquired parallel to the metal-oxide interface. By fitting an extended Wulff-Kaishev rule to the HRTEM data of the truncated octahedral thermodynamic ES in the size range of 2 to 5 nm, we secondly determined the interface and excess line energies associated with the particle-oxide-vacuum triple phase junction in Pd and Pd43Au57 TOs in the epitaxial relationship Pd(-Au)(111)101‖r-TiO2(110)[1-1-1] and in Pd62Au38 TOs in the epitaxial relationship Pd62Au38(100)101‖r-TiO2(110)[1-10]. Our results show a decrease in particle adhesion to the oxide support upon alloying Pd with Au. The loss in adhesion is tentatively attributed to an increase of the lattice strain induced at the metal-oxide interface as gold atoms are added to the palladium lattice.
许多纳米粒子(NPs)的物理性质是由其平衡形状(ES)决定的。因此,了解影响颗粒形态的动力学和热力学参数对于具有目标性质的 NPs 的合理设计至关重要。在这里,我们报告了使用相衬透射电子显微镜(TEM)研究的负载单金属钯和双金属钯金(Pd-Au)单晶截断八面体(TO)的热力学 ES。单金属钯和双金属 Pd62Au38 和 Pd43Au57 TO 是通过脉冲激光沉积在锐钛矿二氧化钛(r-TiO2)纳米棒上生长的,主要暴露(110)面。首先通过对与金属-氧化物界面平行获得的相衬高分辨率 TEM(HRTEM)图像获得颗粒结构和尺寸。通过将扩展的 Wulff-Kaishev 规则拟合到截断八面体热力学 ES 的 HRTEM 数据中,我们确定了与颗粒-氧化物-真空三相结相关的界面和过剩线能,该三相结的尺寸范围为 2 至 5nm,在 Pd 和 Pd43Au57 TO 中,在外延关系 Pd(-Au)(111)101‖r-TiO2(110)[1-1-1]和 Pd62Au38 TO 中,在外延关系 Pd62Au38(100)101‖r-TiO2(110)[1-10]。我们的结果表明,Pd 与 Au 合金化会导致颗粒对氧化物载体的附着力降低。附着力的丧失可能归因于晶格应变的增加,因为金原子被添加到钯晶格中。