Suppr超能文献

利用细菌改善木质纤维素生物精炼过程:预侵蚀的重要性。

Use of bacteria for improving the lignocellulose biorefinery process: importance of pre-erosion.

作者信息

Zhuo Shengnan, Yan Xu, Liu Dan, Si Mengying, Zhang Kejing, Liu Mingren, Peng Bing, Shi Yan

机构信息

1School of Metallurgy and Environment, Central South University, Changsha, 410083 China.

Chinese National Engineering Research Center for Control & Treatment of Heavy Metal Pollution, Changsha, 410083 China.

出版信息

Biotechnol Biofuels. 2018 May 23;11:146. doi: 10.1186/s13068-018-1146-4. eCollection 2018.

Abstract

BACKGROUND

Biological pretreatment is an important alternative strategy for biorefining lignocellulose and has attracted increasing attention in recent years. However, current designs for this pretreatment mainly focus on using various white rot fungi, overlooking the bacteria. To the best of our knowledge, for the first time, we evaluated the potential contribution of bacteria to lignocellulose pretreatment, with and without a physicochemical process, based on the bacterial strain sp. B-6 (hereafter B-6) that was isolated from erosive bamboo slips. Moreover, the mechanism of the improvement of reducing sugar yield by bacteria was elucidated via analyses of the physicochemical changes of corn stover (CS) before and after pretreatment.

RESULTS

The digestibility of CS pretreated with B-6 was equivalent to that of untreated CS. The recalcitrant CS surface provided fewer mediators for contact with the extracellular enzymes of B-6. A pre-erosion strategy using a tetrahydrofuran-water co-solvent system was shown to destroy the recalcitrant CS surface. The optimal condition for pre-erosion showed a 6.5-fold increase in enzymatic digestibility compared with untreated CS. The pre-erosion of CS can expose more phenolic compounds that were chelated to oxidized Mn and also provided mediators for combination with laccase, which was attributable to B-6 pretreatment. B-6 pretreatment following pre-erosion exhibited a sugar yield that was 91.2 mg/g greater than that of pre-erosion alone and 7.5-fold higher than that of untreated CS. This pre-erosion application was able to destroy the recalcitrant CS surface, thus leading to a rough and porous architecture that better facilitated the diffusion and transport of lignin derivatives. This enhanced the ability of laccase and manganese peroxidase secreted by B-6 to improve the efficiency of this biological pretreatment.

CONCLUSION

Bacteria were not found useful alone as a biological pretreatment, but they significantly improved enzymatic digestion after lignocellulose breakdown via other physicochemical methods. Nonetheless, phenyl or phenoxy radicals were used by laccase and manganese peroxidase in B-6 for lignin attack or lignin depolymerization. These particular mediators released from the recalcitrance network of lignocellulose openings are important for the efficacy of this bacterial pretreatment. Our findings thus offer a novel perspective on the effective design of biological pretreatment methods for lignocellulose.

摘要

背景

生物预处理是木质纤维素生物精炼的一种重要替代策略,近年来受到越来越多的关注。然而,目前这种预处理的设计主要集中在使用各种白腐真菌,而忽略了细菌。据我们所知,我们首次基于从侵蚀性竹简中分离出的菌株sp. B-6(以下简称B-6),评估了细菌在有无物理化学过程的情况下对木质纤维素预处理的潜在贡献。此外,通过分析预处理前后玉米秸秆(CS)的物理化学变化,阐明了细菌提高还原糖产量的机制。

结果

用B-6预处理的CS的消化率与未处理的CS相当。难降解的CS表面为与B-6的细胞外酶接触提供的介质较少。使用四氢呋喃 - 水共溶剂系统的预侵蚀策略被证明可以破坏难降解的CS表面。预侵蚀的最佳条件显示,与未处理的CS相比,酶消化率提高了6.5倍。CS的预侵蚀可以使更多与氧化锰螯合的酚类化合物暴露出来,也为与漆酶结合提供了介质,这归因于B-6预处理。预侵蚀后进行B-6预处理的糖产量比单独预侵蚀高91.2 mg/g,比未处理的CS高7.5倍。这种预侵蚀应用能够破坏难降解的CS表面,从而形成粗糙且多孔的结构,更有利于木质素衍生物的扩散和运输。这增强了B-6分泌的漆酶和锰过氧化物酶提高这种生物预处理效率的能力。

结论

单独使用细菌作为生物预处理方法效果不佳,但通过其他物理化学方法分解木质纤维素后,细菌能显著提高酶消化率。尽管如此,B-6中的漆酶和锰过氧化物酶利用苯基或苯氧基自由基攻击木质素或使木质素解聚。这些从木质纤维素孔隙的难降解网络中释放的特殊介质对这种细菌预处理的效果很重要。因此,我们的研究结果为木质纤维素生物预处理方法的有效设计提供了新的视角。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/4177/5964970/a3f001a0146d/13068_2018_1146_Fig1_HTML.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验