Fibre and Particle Engineering Research Unit, University of Oulu, P.O. Box 4300, FI-90014 Oulu, Finland.
Microelectronics Research Unit, University of Oulu, P.O. Box 4500, FI-90014, Finland.
Acta Biomater. 2018 Jul 15;75:346-357. doi: 10.1016/j.actbio.2018.06.013. Epub 2018 Jun 7.
Herein, we report the fabrication of a polyion complex hydrogel from two oppositely charged derivatives of cellulose nanofibrils (CNF). CNF was produced from dissolving pulp through subsequent periodate oxidation, chemical modification, and microfluidization. Three different durations for periodate oxidation (30 min, 120 min, and 180 min) resulted in three different aldehyde contents. Further, two types of chemical modifications were introduced to react with the resulting aldehydes: chlorite oxidation to yield anionic CNF with carboxylic acid groups (DCC) and imination with Girard's reagent T to yield cationic CNF containing quaternary ammonium groups (CDAC). Functional group contents were assessed using conductometric titration and elemental analysis, while nanofibril morphologies were assessed using atomic force microscopy (AFM). Longer durations of periodate oxidation did not yield different width profile but was found to decrease fibril length. The formation of self-standing hydrogel through mixing of DCC and CDAC dispersions was investigated. Oscillatory rheology was performed to assess the relative strengths of different gels. Self-standing hydrogels were obtained from mixture of DCC180 and CDAC180 dispersions in acetate buffer at pH 4 and 5 at a low concentration of 0.5% w/w that displayed approximately 10-fold increase in storage and loss moduli compared to those of the individual dispersions. Self-standing gels containing doxorubicin (an anticancer drug) displayed pH-responsive release profiles. At physiological pH 7.4, approximately 65% of doxorubicin was retained past a burst release regime, while complete release was observed within 5 days at pH 4. Biocompatibility of DCC180, CDAC180, and their mixture were investigated through quantification of the metabolic activity of NIH3T3 cells in vitro. No significant cytotoxicity was observed at concentrations up to 900 µg/mL. In short, the nanocellulose-based polyion complex hydrogels obtained in this study are promising nature-derived materials for biomedical applications.
We demonstrate that polyion complex can be formed between two cellulose nanofibrils containing complementary charges. To the best of our knowledge, this is the first time that polyion complex formation between complementarily-modified cellulose nanofibrils has been reported, and the results may lead to new ideas on applications of the very promising nanocellulosic materials. The polyion complex helps form a self-standing network that is demonstrated to provide controlled and pH-responsive release of doxorubicin. Particularly, the report explores the connection between the physical properties of functionalizable nanocellulosic materials and their potential biomedical applications. Thus, the study encompasses several broad fields of materials science and engineering, chemistry, and biomedical science that we believe is in line with the readers' interests.
本文报告了由两种带相反电荷的纤维素纳米纤维(CNF)衍生物制备聚离子复合物水凝胶。CNF 是通过溶解浆经过高碘酸盐氧化、化学修饰和微流化处理制备的。高碘酸盐氧化的三种不同持续时间(30min、120min 和 180min)导致了三种不同的醛含量。此外,引入了两种类型的化学修饰来与生成的醛反应:亚氯酸盐氧化生成带有羧酸基团的阴离子 CNF(DCC)和用吉拉德试剂 T 进行亚胺化生成含有季铵基团的阳离子 CNF(CDAC)。使用电导率滴定和元素分析评估了官能团含量,而使用原子力显微镜(AFM)评估了纳米纤维形态。较长的高碘酸盐氧化时间不会产生不同的宽度分布,但发现纤维长度会降低。通过混合 DCC 和 CDAC 分散体来研究自支撑水凝胶的形成。进行振荡流变学以评估不同凝胶的相对强度。在乙酸盐缓冲液 pH4 和 5 下,浓度为 0.5%w/w 的 DCC180 和 CDAC180 分散体混合物可获得自支撑水凝胶,与单独的分散体相比,其储能模量和损耗模量增加了约 10 倍。含有阿霉素(一种抗癌药物)的自支撑凝胶显示出 pH 响应释放曲线。在生理 pH7.4 下,在爆发释放阶段过后,约有 65%的阿霉素被保留,而在 pH4 下,在 5 天内观察到完全释放。通过体外定量 NIH3T3 细胞的代谢活性研究了 DCC180、CDAC180 及其混合物的生物相容性。在高达 900μg/mL 的浓度下未观察到明显的细胞毒性。简而言之,本研究中获得的基于纳米纤维素的聚离子复合物水凝胶是用于生物医学应用的有前途的天然衍生材料。