Suppr超能文献

Fe-S 电催化剂的高效析氢:机理研究。

Energy-Efficient Hydrogen Evolution by Fe-S Electrocatalysts: Mechanistic Investigations.

机构信息

Institute of Chemistry , Academia Sinica , Nankang, Taipei 115 , Taiwan.

Instrumentation Center , National Taiwan University , Taipei 106 , Taiwan.

出版信息

Inorg Chem. 2018 Jul 2;57(13):7620-7630. doi: 10.1021/acs.inorgchem.8b00543. Epub 2018 Jun 12.

Abstract

The intrinsic catalytic property of a Fe-S complex toward H evolution was investigated in a wide range of acids. The title complex exhibited catalytic events at -1.16 and -1.57 V (vs Fc/Fc) in the presence of trifluoromethanesulfonic acid (HOTf) and trifluoroacetic acid (TFA), respectively. The processes corresponded to the single reduction of the Fe-hydride-S-proton and Fe-hydride species, respectively. When anilinium acid was used, the catalysis occurred at -1.16 V, identical with the working potential of the HOTf catalysis, although the employment of anilinium acid was only capable of achieving the Fe-hydride state on the basis of the spectral and calculated results. The thermodynamics and kinetics of individual steps of the catalysis were analyzed by density functional theory (DFT) calculations and electroanalytical simulations. The stepwise CCE or CE (C, chemical; E, electrochemical) mechanism was operative from the HOTf or TFA source, respectively. In contrast, the involvement of anilinium acid most likely initiated a proton-coupled electron transfer (PCET) pathway that avoided the disfavored intermediate after the initial protonation. Via the PCET pathway, the heterogeneous electron transfer rate was increased and the overpotential was decreased by 0.4 V in comparison with the stepwise pathways. The results showed that the PCET-involved catalysis exhibited substantial kinetic and thermodynamic advantages in comparison to the stepwise pathway; thus, an efficient catalytic system for proton reduction was established.

摘要

研究了一种 Fe-S 配合物在广泛的酸中的内在催化析氢性能。在三氟甲磺酸(HOTf)和三氟乙酸(TFA)存在下,标题配合物分别在-1.16 V 和-1.57 V(相对于 Fc/Fc)处表现出催化事件。这些过程分别对应于 Fe-氢化物-S-质子和 Fe-氢化物物种的单一还原。当使用苯胺酸时,尽管根据光谱和计算结果,苯胺酸的使用仅能实现 Fe-氢化物状态,但催化作用发生在-1.16 V,与 HOTf 催化的工作电位相同。通过密度泛函理论(DFT)计算和电化学模拟分析了催化的各个步骤的热力学和动力学。分步 CCE 或 CE(C,化学;E,电化学)机制分别由 HOTf 或 TFA 源起作用。相比之下,苯胺酸的参与很可能引发了质子耦合电子转移(PCET)途径,从而避免了初始质子化后不利的中间产物。通过 PCET 途径,与分步途径相比,增加了非均相电子转移速率,并降低了 0.4 V 的过电势。结果表明,与分步途径相比,涉及 PCET 的催化在动力学和热力学上都具有显著优势;因此,建立了一种用于质子还原的高效催化体系。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验